Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model | 330101-00-13-05-02-00 |
| Probe Type | Non-contact eddy current proximity probe |
| Probe Diameter | 8 mm |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Cable Type | 75Ω triaxial FEP insulated standard cable (FluidLoc optional) |
| Total Length (C) | 0.5 meter |
| Minimum Cable Bend Radius | 25.4 mm |
| Recommended Gap Voltage | -9 Vdc (approx. 1.27 mm) |
| Linear Range | 0.25 mm to 2.3 mm (approx. -1 to -17 Vdc) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (for 5-meter system) |
| Dimensions | Probe diameter: 8.0 mm; Max assembled OD: 9.66 mm |
| Weight (Total System) | 0.162 kg (for 0.5-meter system) |
| Operating Temp (Probe) | -52°C to +177°C (standard); up to +218°C for ETR version |
| Operating Temp (Cable) | -52°C to +177°C (standard); up to +260°C for ETR version |
| Operating Temp (Proximitor) | -52°C to +100°C; Storage: up to +105°C |
| Minimum Shaft Diameter | Recommended: 76.2 mm; Minimum: 50.8 mm |
| Minimum Tip Separation | 40 mm axial, 38 mm radial |
| Frequency Response | 0 – 10 kHz, +0 / -3 dB (with up to 305 m of field wiring) |
| Environmental Protection | IP54 (if installed properly) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary application of this probe?
A1: It’s used for vibration and position monitoring on fluid-film bearing machines and Keyphasor/speed measurement.
Q2: Is it compliant with API 670 standards?
A2: Yes, the 5-meter standard system fully meets API 670 requirements for linearity, configuration, and accuracy.
Q3: Is it compatible with older 3300 series components?
A3: Yes, it’s backward compatible with non-XL 3300 5 mm and 8 mm components.
Q4: Does the system require calibration?
A4: No manual matching or bench calibration is needed—components are factory-calibrated to AISI 4140 steel.
Q5: Does it offer protection against oil leakage?
A5: Yes, with the optional FluidLoc cable to prevent oil ingress through cable interiors.
Q6: Are tools required for connector installation?
A6: No. ClickLoc connectors are hand-tightened and self-locking.
Q7: Can this probe operate in high-temperature environments?
A7: Yes. The ETR (Extended Temperature Range) versions can withstand up to 260°C.
Q8: What installation precautions are required?
A8: Ensure thread engagement does not exceed recommended lengths to avoid jamming.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
