Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Part Number | 330101-00-30-10-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread Type | 3/8-24 UNF |
| Case Material | AISI 303 or 304 Stainless Steel |
| Tip Material | Polyphenylene Sulfide (PPS) |
| Cable Type | 75Ω triaxial, FEP insulated |
| Cable Length (Total Length) | 1.0 meter |
| Connector Type | Miniature coaxial ClickLoc, gold-plated |
| Armor | Not included in this model |
| Tensile Strength (Cable to Probe) | 330 N (75 lbf) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Operating Temperature (Probe) | -52°C to +177°C (-62°F to +350°F) |
| Storage Temperature (Probe) | -52°C to +177°C (-62°F to +350°F) |
| Pressure Sealing | Viton® O-ring seal between probe tip and case |
| Linear Range | 2.0 mm (80 mils), from 0.25 to 2.3 mm |
| Scale Factor (5 m/1 m system) | 7.87 V/mm (200 mV/mil) ±5% |
| Deviation from Best Fit Line (DSL) | ±0.025 mm (±1 mil) over linear range |
| Material Certifications | RoHS, CE (EMC 2014/30/EU), FCC part 15, SIL 2/3 compliant |
| Environmental Protection | Optional connector protectors recommended |
| Mounting Torque | 11.2 N·m (100 in·lbf) – recommended |
| Minimum Shaft Diameter | 50.8 mm (2.0 in); Recommended ≥ 76.2 mm (3.0 in) |
| System Length | 1.0 meter (probe only, no extension cable) |
| Weight | 0.323 kg (0.71 lb) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary application of the 330101-00-30-10-02-00 proximity probe?
A1: It is mainly used for vibration and position measurements in rotating machinery with fluid-film bearings. It is also suitable for Keyphasor reference and speed measurements.
Q2: Is the 330101 probe compatible with other 3300 series components?
A2: Yes, it is fully compatible and interchangeable with both XL and non-XL 3300 series 5 mm and 8 mm components.
Q3: What is the recommended gap voltage setting for this proximity probe?
A3: The recommended gap setting is -9 VDC, which corresponds to approximately 1.27 mm (50 mils) from the target.
Q4: Can this probe be used in high-temperature environments?
A4: The standard version can operate up to 177°C. For higher temperatures, the Extended Temperature Range (ETR) version should be used.
Q5: Does this probe require a separate extension cable?
A5: No, this specific model is a 1.0-meter version and does not require an extension cable.
Q6: What type of connector is used in this model?
A6: It uses a miniature coaxial ClickLoc connector with a locking mechanism that ensures secure connection without the need for tools.
Q7: What is the maximum allowable tensile load on the probe cable?
A7: The maximum rated tensile strength from the probe case to cable is 330 N (75 lbf).
Q8: Is it necessary to use connector protectors?
A8: It is highly recommended for all installations to enhance environmental sealing and prevent oil ingress, especially in harsh environments.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
