Bently Nevada 330105-02-12-10-12-00 3300 XL 8 mm Reverse Mount Probe

FAQ

Q1: What is the maximum operating temperature for the 3300 XL 8 mm Reverse Mount Probe?
A1: The standard probe operates between -52°C to +177°C (-62°F to +350°F). An extended temperature range probe can operate up to +218°C (+425°F) for the probe tip.

Q2: What is the typical frequency response of the 3300 XL 8 mm system?
A2: The system has a frequency response of 0 to 10 kHz, with a +0, -3 dB range.

Q3: What is the minimum target size required for the probe?
A3: The minimum target size is 15.2 mm (0.6 in) in diameter for a flat target.

Q4: What is the weight of the probe?
A4: The probe has a weight of approximately 0.161 kg.

Q5: How do I install the probe’s connectors?
A5: The probe connectors are gold-plated and use the ClickLoc locking mechanism. Finger-tight torque is sufficient for installation, and no special tools are needed.

Q6: What is the cable bend radius for this probe system?
A6: The minimum cable bend radius is 25.4 mm (1.0 in).

Q7: What is the recommended gap setting for radial vibration measurements?
A7: The recommended gap setting is -9 Vdc, which is approximately 1.27 mm (50 mils).

Q8: Can the 3300 XL 8 mm system be used in hazardous environments?
A8: Yes, the 3300 XL 8 mm system has hazardous area approvals for use in Class I, Zone 0 and 2, and other certified areas, including ATEX, IECEx, and CSA certifications.

3300 XL 8 mm Reverse Mount Probe 330105-02-12-10-12-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.