Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product | 330171‑00‑08‑10‑02‑05 5 mm Proximity Probe |
| Product Model | 330171‑00‑08‑10‑02‑05 |
| Product Type | 3300 Series Eddy‑Current Proximity Probe |
| Measurement Principle | Non‑contact displacement measurement using eddy‑current technology |
| Probe Tip Diameter | 5 mm |
| Thread Type | 1/4‑28 UNF |
| Case Length | 20 mm |
| Cable Length | 1.0 m |
| Connector Type | Miniature coaxial ClickLoc |
| Linear Sensing Range | 0.25 mm – 2.0 mm |
| Frequency Response | DC – 10 kHz |
| Operating Temperature | –35 °C to +177 °C |
| Housing Material | Stainless steel |
| Cable Jacket | FEP insulated, 75 Ω triaxial cable |
| Dimensions (Overall) | Length 20 mm (probe body) + 1.0 m cable; Tip diameter 5 mm |
| Weight | ~0.323 kg |
| Operating Environment | Industrial machinery condition monitoring |
| Compliance | Compatible with 3300 Proximitor and monitoring electronics |
FAQ
FAQ
Q1: What is the Bently Nevada 330171‑00‑08‑10‑02‑05 used for?
A1: It is a proximity probe for non‑contact measurement of shaft vibration and displacement in rotating machinery condition monitoring systems.
Q2: What size is the sensing tip on this probe?
A2: The sensing tip diameter is 5 mm.
Q3: What type of signal does this probe output?
A3: It outputs an analog voltage proportional to the gap when connected to a compatible proximitor or conditioning module.
Q4: How long is the integral cable on this probe?
A4: The cable length is 1.0 meter.
Q5: Can this probe operate in harsh environments?
A5: Yes, it operates over –35 °C to +177 °C industrial temperature range.
Q6: What connector type does this probe use?
A6: It uses a miniature coaxial ClickLoc connector.
Q7: What maintenance is required?
A7: Routine visual inspections and gap verification; no frequent calibration is typically needed.
Q8: What additional components are needed to make this a working measurement system?
A8: A compatible proximitor sensor or signal conditioning module, and, if required, extension cables to connect to the monitoring system.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
