Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product Model | 330172-00-28-10-02-00 |
| Product Type | 3300 Series 5 mm Eddy-Current Proximity Probe |
| Measurement Principle | Non-contact displacement and vibration sensing using eddy-current technology |
| Probe Tip Diameter | 5 mm (standard 3300 5 mm proximity probe) |
| Thread Type | 1/4-28 UNF standard threaded mount (typical for 5 mm probes) |
| Rigid Body Length | ~28 mm overall case length (code “28”) |
| Cable Length | 1.0 m (code “10”) |
| Connector Type | Miniature coaxial ClickLoc™ connector (code “02”) |
| Agency Approvals | None (code “00”) |
| Linear Sensing Range | ~0.25 mm – 2.3 mm typical (industry standard range for 3300 5 mm probes) |
| Recommended Gap | ~1.27 mm for best linear output |
| Sensitivity | ~7.87 V/mm (200 mV/mil) typical |
| Frequency Response | DC to ~10 kHz typical with appropriate field wiring |
| Operating Temperature Range | –35 °C to +177 °C typical industrial range |
| Housing Material | Stainless steel probe body |
| Cable Jacket | Shielded FEP-insulated cable, braided shielding (industry standard) |
| Dimensions | Probe body rigid section ~28 mm × diameter 5 mm; cable length ~1.0 m |
| Weight | ~0.25–0.32 kg typical for 3300 5 mm proximity probes |
| Operating Environment | Industrial machinery condition monitoring systems |
| Compliance | Compatible with 3300 XL proximitor and monitoring electronics systems |
FAQ
FAQ
Q1: What is the Bently Nevada 330172-00-28-10-02-00 used for?
A1: It is a 5 mm eddy-current proximity probe designed to measure shaft vibration and displacement without physical contact, used in industrial machine condition monitoring systems.
Q2: What does the “28” in the model number signify?
A2: “28” refers to the overall rigid body length of the probe, approximately 28 mm.
Q3: How long is the cable on this probe?
A3: The integral cable is approximately 1.0 meter long, as indicated by the “10” code segment.
Q4: What type of connector does this probe use?
A4: It uses a miniature coaxial ClickLoc™ connector (“02”), which provides a reliable connection to extension cables or proximitor inputs.
Q5: What is the typical sensing range of this probe?
A5: It typically measures linearly from about 0.25 mm up to around 2.3 mm from the target surface, depending on gap settings.
Q6: What environments can this probe operate in?
A6: It is built for industrial environments and can operate across a wide temperature range from about –35 °C to +177 °C.
Q7: What kind of signal output does this probe provide?
A7: The probe produces an analog voltage proportional to the gap between the tip and the target; this raw signal is conditioned by a proximitor or monitoring electronics.
Q8: Do I need additional components to use this probe?
A8: Yes — it must be connected to a compatible proximitor sensor and, if necessary, extension cable and monitoring hardware to condition and interpret the signal.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
