Bently Nevada 330173-00-08-10-01-00 5 mm Proximity Transducer

FAQ

Q1: What is Bently Nevada 330173-00-08-10-01-00?
A: It is a Bently Nevada 3300 Series 5 mm proximity transducer designed for non-contact monitoring of rotating machinery.

Q2: What is the probe diameter?
A: The probe belongs to the 5 mm proximity-transducer family of the Bently Nevada 3300 system.

Q3: What sensing principle does it use?
A: It uses non-contact eddy-current sensing to detect changes in the distance between the probe tip and a conductive rotating shaft.

Q4: What is the cable length?
A: The “-10” configuration corresponds to a 1.0 m total system length.

Q5: What is the probe case length?
A: The “-08” configuration corresponds to an approximately 0.8-inch (20.3 mm) case-length configuration.

Q6: What is the typical sensitivity?
A: The standard Bently Nevada 3300 5 mm proximity system uses a nominal sensitivity of approximately 200 mV/mil (7.87 mV/µm) when paired with the appropriate Proximitor Sensor.

Q7: What are the dimensions and weight of 330173-00-08-10-01-00?
A: The probe is approximately 5 mm in diameter and 20.3 mm in case length, with a total system cable length of approximately 1.0 m. A practical reference weight is 0.15–0.25 kg.

Q8: What is 330173-00-08-10-01-00 commonly used for?
A: It is used for shaft vibration, radial displacement and position monitoring on rotating equipment such as turbines, compressors, pumps, motors and generators. The 3300 5 mm system is intended for industrial machinery monitoring applications.