Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | Bently Nevada 330910-03-09-05-02-05 |
| Series | 3300 NSv Proximity Probes |
| Probe Type | Non-contact eddy-current proximity probe |
| Sensing Principle | Eddy current displacement measurement |
| Measurement Range | ±1.0 mm typical linear range |
| Linear Range | 2 mm (approx.) |
| Sensitivity | 7.87 V/mm (nominal) |
| System Compatibility | Works with 3300 NSv Proximitor and extension cables |
| Target Material | AISI 4140 steel (standard) |
| Operating Temperature | −35°C to +177°C |
| Cable Type | Armored or non-armored depending on configuration |
| Cable Connector | Standard BNC or industrial coaxial connector |
| Shielding | Double-shielded low-noise cable |
| Typical Applications | Shaft vibration monitoring, position measurement, thrust monitoring, differential expansion |
| Total Length | 0.5 meter |
| Weight | 0.15 kg |
FAQ
FAQ
Q1: What applications are ideal for the 330910-03-09-05-02-05 probe?
A1: It is suitable for precise shaft displacement and vibration monitoring in turbines, generators, and other rotating machinery.
Q2: Can this probe operate at high shaft speeds?
A2: Yes, its eddy-current design allows accurate measurements at high rotational speeds.
Q3: How should the probe be positioned relative to the shaft?
A3: The probe must be installed perpendicular to the target surface with the specified gap to ensure linear measurements.
Q4: How does the probe maintain signal integrity in electrically noisy environments?
A4: The double-shielded cable minimizes electromagnetic interference, maintaining consistent signal quality.
Q5: Is this probe affected by temperature changes?
A5: It is rated for −35°C to +177°C and can operate reliably within this range.
Q6: What maintenance practices are recommended?
A6: Inspect the probe tip, cable, and connector periodically; recalibration is only needed if the probe is physically damaged.
Q7: Can multiple probes be connected to one monitoring system?
A7: Yes, it can interface with multiple 3300 NSv Proximitors for multi-shaft vibration analysis.
Q8: Are there limitations on the target material?
A8: It is optimized for ferromagnetic materials such as AISI 4140 steel; non-ferrous targets may reduce sensitivity and linearity.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
