Bently Nevada 3500/62-01-00 136499-01 Process Variable Monitor I/O Module

FAQ (Frequently Asked Questions)

Q1: What types of signals can the 3500/62-01-00 I/O Module process?
A1: This module processes analog voltage signals in the range of -10 Vdc to +10 Vdc.

Q2: Does this module support current inputs like 4-20 mA?
A2: No, the 3500/62-01-00 (part number 136499-01) specifically supports ±10 Vdc voltage inputs. For 4-20 mA inputs, other model variants must be used.

Q3: What is the input impedance for voltage measurements?
A3: The input impedance for ±10 Vdc input is 1 MΩ, ensuring minimal load on the measured circuit.

Q4: How accurate are the signal readings on this module?
A4: Accuracy is typically within ±0.33% of full scale and not worse than ±1%.

Q5: Is the I/O module hot-swappable?
A5: No, the module is not hot-swappable. Power should be turned off during installation or removal to ensure safety.

Q6: What are the LED indicators used for on the front panel?
A6: The front panel has three LEDs: OK (module health), TX/RX (communication status), and Bypass (bypass mode active).

Q7: Can this module be used in hazardous area installations?
A7: Yes, it supports hazardous area certifications including ATEX and CSA when installed per the specified drawings and with appropriate barriers.

Q8: What is the minimum signal span for proper voltage measurement?
A8: The minimum required signal span for voltage input is 2 Volts, to ensure accurate scaling and alarm setting.

136499-01 3500/62-01-00 Bently Nevada I/O Module Process Variable Monitor

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.