Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | VE4003S2B2 |
| Manufacturer | Emerson |
| Product Series | DeltaV™ S-Series Traditional I/O |
| Product Type | Analog Input Module |
| Application | Process Signal Acquisition and Monitoring |
| Input Channels | 8 Channels |
| Input Signal Range | 4–20 mA |
| HART Communication | Supported on All Channels |
| Input Resolution | 16-bit |
| Accuracy | ±0.1% of span (typical) |
| Input Impedance | ~250 Ω |
| Supported Devices | 2-wire and 4-wire transmitters |
| Isolation | Channel-to-system isolation (high dielectric strength) |
| Terminal Block Type | Fused or standard 8-channel AI terminal block |
| Wiring Method | Direct / mass termination depending on configuration |
| Power Consumption | ~120–150 mA (LocalBus typical), field dependent |
| Response / Filtering | Low-pass filtering (~2.7 Hz cutoff typical) |
| Hot-Swap Capability | Supported |
| Communication Interface | DeltaV S-Series LocalBus |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% Non-condensing |
| Mounting Type | DeltaV S-Series Carrier Installation |
| Dimensions (L × W × H) | ~102 mm × 114 mm × 46 mm |
| Weight | ~0.40 kg |
| Certifications | CE, ATEX, IECEx (system dependent) |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Emerson VE4003S2B2 used for?
It is used to read 4–20 mA analog signals from field instruments and send them to the DeltaV control system for monitoring and process control.
Q2: How many channels does it have?
The module provides 8 independent analog input channels.
Q3: Does it support HART communication?
Yes, it supports HART on all channels, allowing device diagnostics, calibration, and configuration.
Q4: What types of field devices can be connected?
It works with 2-wire and 4-wire transmitters, including pressure, temperature, flow, and level instruments.
Q5: What is the typical accuracy?
The module typically achieves ±0.1% of span accuracy, depending on system configuration and calibration conditions.
Q6: What are the dimensions and weight?
It measures approximately 102 mm × 114 mm × 46 mm and weighs around 0.40 kg.
Q7: Can the module be replaced while running?
Yes, it supports hot-swapping, allowing replacement without shutting down the DeltaV system.
Q8: Does it require routine calibration?
The module itself does not require routine calibration; periodic verification of loop accuracy and field wiring integrity is recommended.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
