Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | VE4102 |
| Manufacturer | Emerson |
| Product Series | DeltaV™ S-Series / M-Series I/O System |
| Product Type | High-Density Analog Input Module |
| Application | Process Signal Acquisition and Monitoring |
| Input Channels | 8 Channels per Module |
| Input Signal Type | 4–20 mA Current, ±10 V Voltage |
| Input Resolution | 16-bit |
| Accuracy | ±0.1% of Full Scale (Typical) |
| Input Impedance | 250 Ω (for current input) |
| HART Communication | Supported |
| Isolation | Channel-to-System Isolation |
| Terminal Block Type | 8-Channel Mass Termination Block |
| Update Rate | ~100 ms (system dependent) |
| Hot-Swap Capability | Supported |
| Communication Interface | DeltaV LocalBus |
| Power Consumption | < 10 W |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% Non-Condensing |
| Mounting Type | DeltaV S-Series Carrier Installation |
| Dimensions (L × W × H) | Approximately 170 mm × 107 mm × 50 mm |
| Weight | Approximately 0.40 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Emerson VE4102 used for?
The VE4102 is used to acquire analog process signals (4–20 mA or ±10 V) from field devices for control and monitoring purposes.
Q2: How many input channels does the module have?
It provides 8 analog input channels.
Q3: Does the module support HART communication?
Yes, all channels support HART communication for diagnostics and configuration.
Q4: What types of signals are supported?
The module supports 4–20 mA current signals and ±10 V voltage signals.
Q5: What are the physical dimensions of VE4102?
The module measures approximately 170 mm × 107 mm × 50 mm.
Q6: How much does the module weigh?
The weight is approximately 0.40 kg.
Q7: Can the VE4102 be replaced while the system is running?
Yes, it supports hot-swapping, allowing replacement without shutting down the system.
Q8: Does VE4102 require calibration?
Routine calibration is generally not required, but periodic verification of input accuracy and wiring integrity is recommended.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
