Epro PR6424/101-030 16mm Eddy Current Sensor

FAQ

Q1: What does the “030” code represent?
A1: It identifies a specific configuration, typically indicating a probe length of about 130 mm or a special cable/connector arrangement.

Q2: Is this sensor contact or non-contact?
A2: Non-contact; it measures through the air gap using the eddy-current principle without touching the shaft.

Q3: What are the static and dynamic measurement ranges?
A3: Static ±2.0 mm; dynamic 0–1,000 μm.

Q4: What is the minimum shaft diameter required?
A4: Shaft diameter should be ≥ 80 mm.

Q5: What is the recommended installation air gap?
A5: Approximately 2.7 mm for optimal linearity and stable output.

Q6: What is the operating temperature range?
A6: –35°C to +180°C.

Q7: What type of output does the sensor provide and how is it used?
A7: It outputs an eddy-current analog signal; a compatible driver module is required to convert it for monitoring systems.

Q8: For which machinery or applications is it suitable?
A8: Suitable for turbines, compressors, pumps, fans, and other rotating machinery to monitor shaft displacement, vibration, eccentricity, and axial/radial position.

16mm Eddy Current Sensor Epro PR6424/101-030

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.