GE IS220PSVOH1B Mark VIe Series Servo Control Pack

FAQ (Q&A)

Q1: Is the IS220PSVOH1B compatible with non-GE servo valves?
A1: Yes, but configuration via ToolboxST is required to match valve specifications.

Q2: How do I interpret the ENA1/ENA2 LEDs?
A2: ENA1/ENA2 indicate servo enable status. Solid green = enabled; off = disabled.

Q3: Can the infrared port be activated for diagnostics?
A3: No, the port is non-functional in this model.

Q4: What happens if the temperature sensor detects overheating?
A4: The Attn LED flashes, and a fault is logged in the control system.

Q5: Is manual reconfiguration mandatory after replacing the terminal board?
A5: Yes, terminal board replacement requires manual reconfiguration in ToolboxST.

Q6: Can firmware be updated remotely?
A6: Yes, via Ethernet using ToolboxST’s firmware update utility.

Q7: What is the maximum servo loop update rate?
A7: Typically 1 kHz, depending on network load and configuration.

Q8: Are spare WSVO driver modules sold separately?
A8: Yes, WSVO modules are available as standalone components.

Q9: How to test servo response without actuator movement?
A9: Use step current mode in ToolboxST to validate driver output.

Q10: Does the pack support third-party Ethernet switches?
A10: Yes, but GE recommends using certified industrial-grade switches.

GE IS220PSVOH1B Mark VIe Series Servo Control Pack

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.