Honeywell FC-TSDO-04UNI Safety Manager System Module

Frequently Asked Questions (FAQ)

Q1: How many output channels are available on the FC-TSDO-04UNI module?
A1: The FC-TSDO-04UNI module provides 4 digital output channels.

Q2: What is the maximum voltage rating for this module?
A2: The module supports up to 50 VDC under IEC 1010 overvoltage category 3 and up to 150 VDC under category 2.

Q3: What is the continuous current capacity for each channel?
A3: Each channel can carry up to 2 A continuously. The actual maximum current is determined by the output module connected.

Q4: What type of rail mounting is supported?
A4: The module is designed for DIN EN rail mounting, compatible with TS32 and TS35 × 7.5 profiles.

Q5: What is the standard wire size and termination specification for field wiring?
A5: The screw terminals accept wires up to 2.5 mm² (AWG 14), with a required strip length of 7 mm and tightening torque of 0.5 Nm.

Q6: Is the FC-TSDO-04UNI module certified for safety standards?
A6: Yes, it carries certifications from CE, TUV, UL, CSA, and FM.

Q7: What are the physical dimensions and weight of the module?
A7: The dimensions are 60 mm (L) × 70 mm (W) × 54 mm (H), and the module weighs approximately 0.23 kg.

Q8: Can this module interface directly with Safety Manager output modules?
A8: Yes, it connects via system interconnection cable SICC-0001/Lx to output modules like SDO-04x or SDOL-04x.

FC-TSDO-04UNI Honeywell Safety Manager System Module

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.