Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | Bently Nevada 330901-11-25-10-01-00 |
| Type | 3300 XL Proximitor Sensor |
| Product Category | Machinery Condition Monitoring Electronics |
| Product Family | 3300 XL Series |
| Function | Conditions proximity probe signals and outputs a proportional voltage |
| Measurement Principle | Eddy-current signal conditioning |
| Input Compatibility | 3300 XL proximity probes and extension cables |
| Output Signal | Analog voltage proportional to shaft displacement |
| Power Supply Requirement | 18 V to 30 V DC |
| Frequency Response | DC to 10 kHz (typical) |
| System Calibration | Factory calibrated with matched probe and cable |
| Housing Material | Aluminum alloy |
| Mounting Method | DIN rail or panel mounting |
| Operating Temperature Range | –35 °C to +65 °C |
| Application Environment | Industrial rotating machinery monitoring |
| Dimensions | Approx. 114 mm × 114 mm × 51 mm |
| Weight | Approx. 0.45 kg |
FAQ
FAQ
Q1: What is the function of the 330901-11-25-10-01-00 Proximitor Sensor?
It conditions the signal from a 3300 XL proximity probe and provides a stable voltage output for monitoring and protection systems.
Q2: Is this device a probe or a signal conditioner?
It is a signal conditioning module (Proximitor Sensor), not a probe.
Q3: What does the “330901” series indicate?
It identifies the unit as part of the Bently Nevada 3300 XL Proximitor Sensor family.
Q4: What does the “11-25” portion of the model number refer to?
It denotes specific internal configuration or versioning defined by the manufacturer.
Q5: Which probes are compatible with this Proximitor?
It is designed for use with Bently Nevada 3300 XL proximity probes and matching extension cables.
Q6: Does this Proximitor require on-site calibration?
No, it is factory calibrated when used as part of a matched 3300 XL system.
Q7: What are the physical dimensions and weight of this unit?
The housing measures approximately 114 mm × 114 mm × 51 mm and weighs about 0.45 kg.
Q8: Where is this Proximitor typically installed?
It is normally mounted on a DIN rail or panel inside an industrial control or monitoring cabinet.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
