Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | 16710-60 |
| Product Type | Industrial Proximity (Eddy-Current) Probe |
| Sensor Technology | Eddy-current, non-contact displacement measurement |
| Measurement Function | Position/displacement sensing of conductive targets |
| Probe Diameter | 6.0 mm (nominal) |
| Cable Type | Integral sensor cable |
| Cable Length | 1.5 m (typical industrial length) |
| Connector Type | Integral leads or sealed industrial connector (model-dependent) |
| Output Signal | Analog voltage proportional to probe-to-target gap |
| Operating Temperature Range | -40 °C to +125 °C (typical industrial rating) |
| Housing Material | Stainless steel or rugged industrial alloy |
| Environmental Suitability | Industrial environments with vibration, dust, and moderate moisture |
| Installation Method | Mounted near target surface with proper standoff distance |
| Dimensions | Probe diameter 6.0 mm, probe body length ~80 mm |
| Weight | 0.11 kg |
FAQ
FAQ
Q1: What is the 16710-60 sensor used for?
A1: It is an industrial eddy-current proximity probe for measuring position or displacement of conductive machine components.
Q2: What does the “60” in the model number represent?
A2: It refers to the nominal probe diameter of 6.0 mm.
Q3: What type of output does this probe provide?
A3: It provides an analog voltage signal proportional to the distance between the probe tip and the conductive target.
Q4: Is this probe suitable for harsh industrial environments?
A4: Yes. Its rugged construction and stainless steel housing make it suitable for environments with vibration, dust, and moisture.
Q5: Can this probe be used for vibration monitoring?
A5: Yes. When paired with a compatible signal conditioner, it can be used for vibration monitoring and condition measurement.
Q6: Does this probe require a specific signal conditioner?
A6: Yes. A compatible eddy-current signal conditioner is required to convert the raw probe signal for use.
Q7: What precautions should be taken during installation?
A7: Ensure correct standoff distance, avoid mechanical shock to the probe tip, and route the cable to prevent strain or sharp bends.
Q8: What are the approximate dimensions and weight?
A8: The probe diameter is ~6.0 mm, body length is ~80 mm, and the weight is ~0.11 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
