Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product | Bently Nevada 330172‑00‑08‑10‑02‑00 5 mm Proximity Probe |
| Model Number | 330172‑00‑08‑10‑01‑00 |
| Product Type | 3300 Series Eddy‑Current Proximity Probe |
| Measurement Principle | Non‑contact eddy‑current displacement & vibration measurement |
| Probe Tip Diameter | 5 mm |
| Thread Type | 1/4‑28 UNF standard mounting |
| Unthreaded Length | 00 (0 mm) |
| Overall Case Length | 08 (≈ 8 mm rigid body) |
| Cable Length Code | 10 (1.0 m / ~3.3 ft) |
| Connector Type | 01 indicates ClickLoc connector without additional options (standard connector style) |
| Linear Sensing Range | ~0.25 mm – 2.0 mm typical for 5 mm probes (system dependent) |
| Output Signal | Raw analog voltage proportional to gap (requires compatible conditioning electronics) |
| Frequency Response | DC to ~10 kHz typical for 3300 series probes |
| Operating Temperature Range | –35 °C to +177 °C typical industrial range |
| Housing Material | Stainless steel probe body |
| Cable Jacket | Shielded FEP insulated coaxial or triaxial cable |
| Dimensions | 8 mm probe body length (rigid section) + 1.0 m cable; probe tip diameter 5 mm |
| Weight | ~0.25–0.32 kg typical (varies with cable and connector) |
| Operating Environment | Industrial machinery condition monitoring systems |
| Compliance | Designed for use with 3300 XL proximitor and monitoring electronics systems |
FAQ
FAQ
Q1: What is the Bently Nevada 330172‑00‑08‑10‑01‑00 used for?
A1: It is a precision eddy‑current proximity probe used for non‑contact measurement of shaft vibration and displacement in industrial rotating machinery monitoring systems.
Q2: What does the “01” in the model number signify?
A2: “01” denotes the standard ClickLoc connector type configuration for this probe without additional special options.
Q3: What size is the sensing tip on this probe?
A3: The sensing tip diameter is 5 mm, allowing accurate measurement in compact spaces.
Q4: How long is the integral cable on this probe?
A4: The cable length is approximately 1.0 meter (about 3.3 feet), coded as “10”.
Q5: What environments can this probe operate in?
A5: It is designed to operate in industrial environments, with an operating temperature range from about –35 °C to +177 °C.
Q6: What type of signal does this probe provide?
A6: The probe provides an analog voltage proportional to the distance between the tip and the target, which must be conditioned by a compatible proximitor sensor or monitoring module.
Q7: What is the typical measurement range?
A7: Typical linear sensing range for this probe is around 0.25 mm to 2.0 mm from the target surface, depending on system settings.
Q8: What additional components are needed to use this probe?
A8: To form a full measurement system, you need a compatible proximitor conditioning sensor and, if needed, extension cables and monitoring electronics.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
