Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product | Bently Nevada 330173‑00‑03‑10‑02‑00 – 3300 Series 5 mm Proximity Probe |
| Manufacturer | Bently Nevada |
| Product Model | 330173-00-03-10-02-00 |
| Product Type | 3300 Series Eddy-Current Proximity Probe |
| Measurement Principle | Non-contact eddy-current displacement and vibration sensing |
| Probe Tip Diameter | 5 mm |
| Thread Size | M8 × 1 (standard threaded mount) |
| Unthreaded Length | 0 mm (code “00”) |
| Overall Case Length | ~30 mm (code “03”) |
| Cable Length | ~1.0 m (code “10”) |
| Connector Type | Miniature coaxial ClickLoc™ connector (code “02”) |
| Agency Approval | None (code “00”) |
| Linear Sensing Range | ~0.25 mm – 2.0 mm typical for 5 mm probes |
| Output Signal | Analog voltage proportional to gap/displacement (raw signal requires conditioning) |
| Frequency Response | DC to ~10 kHz typical |
| Operating Temperature Range | –40 °C to +177 °C typical industrial range |
| Housing Material | Stainless steel probe body |
| Cable Jacket | Shielded FEP-insulated coaxial cable |
| Dimensions | Probe body ~30 mm × Ø5 mm; cable length ~1.0 m |
| Weight | ~0.32 kg typical |
| Operating Environment | Industrial rotating machinery condition monitoring |
| Compliance | Designed to work with 3300 proximitor and monitoring electronics |
FAQ
FAQ
Q1: What is the Bently Nevada 330173-00-03-10-02-00 used for?
A1: It is a 5 mm eddy-current proximity probe used for non-contact measurement of shaft vibration and displacement on rotating machinery as part of a condition monitoring system.
Q2: What does the “03” in the model number mean?
A2: “03” indicates the overall case length code, corresponding to an approximately 30 mm rigid probe body.
Q3: How long is the integral cable?
A3: The integral cable length is approximately 1.0 meter (code “10”).
Q4: What type of connector does this probe use?
A4: It uses a miniature coaxial ClickLoc™ connector (code “02”) for reliable electrical connection.
Q5: What is the typical sensing range of this probe?
A5: The typical linear sensing range is roughly 0.25 mm to 2.0 mm from the target surface, depending on system configuration and gap settings.
Q6: In what environments can this probe operate?
A6: It is built for industrial environments and can operate across a wide temperature range from –40 °C to around +177 °C.
Q7: What additional components are required to use this probe?
A7: To form a complete measurement system, you need a compatible proximitor conditioning sensor and monitoring electronics to condition and analyze the raw signal.
Q8: What machinery applications is this probe suitable for?
A8: This probe is commonly used on turbines, compressors, pumps, motors, and other rotating equipment where precise non-contact vibration and displacement measurements are needed.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
