Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product | 330173-01-04-05-02-05 5 mm Proximity Probe |
| Product Model | 330173-01-04-05-02-05 |
| Product Type | 3300 Series Eddy-Current Proximity Probe |
| Measurement Principle | Non-contact eddy-current displacement & vibration sensing (3300 Series) |
| Probe Tip Diameter | 5 mm (standard for 3300 5 mm probes) |
| Thread Size | M8 × 1 threaded mount (metric) |
| Unthreaded Length | ~10 mm (code “01” indicates a short unthreaded section before body) (industry ordering convention) |
| Overall Rigid Body Length | ~40 mm (code “04” indicates body configuration ~40 mm) (industry ordering convention) |
| Cable Length | 0.5 m (code “05”) |
| Connector Type | Miniature coaxial ClickLoc™ (code “02”) |
| Agency/Certification | Multiple industrial approvals (code “05”) |
| Linear Sensing Range | ~0.25 mm – ~2.0 mm typical for 5 mm 3300 probes |
| Output Signal | Raw analog voltage proportional to gap/displacement (requires compatible conditioning electronics) |
| Frequency Response | DC to ~10 kHz typical for 3300 Series probes |
| Operating Temperature Range | –40 °C to +177 °C typical industrial range |
| Housing Material | AISI 304 stainless steel probe body (rugged industrial) |
| Cable Jacket | Shielded FEP-insulated coaxial cable |
| Dimensions (Overall) | Probe rigid body ~40 mm × diameter 5 mm; cable ~0.5 m total length |
| Weight | ~0.32 kg typical (probe assembly with cable) |
| Operating Environment | Industrial rotating machinery condition monitoring systems |
| Compliance | Compatible with 3300 Series proximitor and monitoring electronics |
FAQ
FAQ
Q1: What is the Bently Nevada 330173-01-04-05-02-05 used for?
A1: It is a 5 mm eddy-current proximity probe designed for non-contact measurement of shaft vibration and displacement in industrial condition monitoring systems.
Q2: What does the “01” in the model number mean?
A2: “01” denotes a short unthreaded section before the rigid body of the probe, allowing for flexible mounting alignment (industry ordering convention).
Q3: How long is the rigid probe body on this model?
A3: The rigid body length is approximately 40 mm based on the “04” body length code (industry ordering convention).
Q4: What is the cable length of this probe?
A4: This probe includes an integral cable of approximately 0.5 meters.
Q5: What type of connector does this probe use?
A5: It uses a miniature coaxial ClickLoc™ connector for secure field connections.
Q6: What environments can this probe operate in?
A6: The probe is built for industrial environments and can operate across a wide temperature range from about –40 °C up to +177 °C.
Q7: What kind of output does this probe provide?
A7: It provides a raw analog voltage proportional to the target gap/displacement, which requires conditioning by compatible proximitor or monitoring electronics.
Q8: What additional components are needed to use this probe?
A8: To form a complete measurement system, you need a compatible proximitor conditioning sensor and, if required, extension cables and monitoring electronics to process and analog signal.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
