Bently Nevada 330174-00-06-20-02-00 3300 Series Eddy‑Current Proximity Probe

FAQ

Q1: What is the Bently Nevada 330174‑00‑06‑20‑02‑00 used for?
A1: It is a 5 mm 3300 Series eddy‑current proximity probe designed for non‑contact measurement of shaft vibration and displacement on rotating machinery as part of an industrial condition monitoring system.

Q2: What do the model number segments “06‑20‑02‑00” mean?
A2: “06” indicates a rigid body case about 60 mm long, “20” means the integral cable is approximately 2.0 meters long, “02” identifies the miniature coaxial ClickLoc™ connector, and “00” shows no special agency approval options.

Q3: What is the sensing range of this probe?
A3: Typical linear sensing range is from approximately 0.25 mm up to around 2.3 mm from the target surface when used with compatible proximitor conditioning systems.

Q4: What type of signal does this proximity probe output?
A4: It produces a raw analog voltage proportional to gap/displacement; this signal must be conditioned by a proximitor sensor or monitoring electronics to be used.

Q5: What environments can this probe withstand?
A5: The probe is built for industrial environments and can operate across a wide temperature range (about –35 °C to +177 °C) with a rugged stainless steel housing.

Q6: What connector and cable does this product use?
A6: It uses a Miniature coaxial ClickLoc™ connector with a 2.0 m cable, providing secure and reliable electrical connections.

Q7: How is the probe physically mounted?
A7: It mounts via an M8 × 1 threaded section into an appropriate housing or mounting block, giving a stable position in rotor‑to‑shaft clearance measurement applications.

Q8: What additional components are required to use this probe?
A8: To make a working measurement setup, you need a compatible proximitor conditioning sensor, and potentially extension cable and monitoring electronics to condition, process, and analyze the raw output signal.

330174-00-06-20-02-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.