Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | IC694MDL732 (GE Fanuc) |
| Product Type | DC Output Module (Positive Logic) |
| Series | PACSystems™ RX3i |
| Model Number | IC694MDL732 |
| Output Points | 8 (single group) |
| Output Voltage Range | 12–24 V DC (+20 %, -15 %) |
| Rated Output Voltage | 12/24 V DC |
| Output Current | 0.5 A per point |
| Common Output Rating | 2 A maximum per common group |
| Inrush Current | 4.78 A for 10 ms |
| Output Voltage Drop | ~1 V max |
| Off‑State Leakage | ~1 mA max |
| Response Time | ~2 ms ON/OFF |
| Isolation | Optical isolation (Field to backplane/frame) — 250 VAC continuous, 1500 VAC for 1 min |
| Power Consumption | ~50 mA from 5 V backplane bus (all outputs on) |
| Mounting | Fits into any RX3i I/O slot / backplane |
| Status Indicators | LEDs for individual output state |
| Operating Temperature | Standard industrial range (0 °C – 60 °C) |
| Humidity | 5 % – 95 % non‑condensing |
| Dimensions (approx.) | ~145 mm × 100 mm × 35 mm |
| Weight | ~1.36 kg (3.00 lbs) |
| Backplane Interface | RX3i standard I/O backplane |
FAQ
FAQ
Q1. What type of module is IC694MDL732?
It is an 8‑point DC output module with positive logic for GE Fanuc PACSystems RX3i PLCs, suitable for driving discrete DC loads.
Q2. How many output channels does this module have?
It provides 8 discrete output points configured as one common group.
Q3. What voltage range does it support?
The module operates at 12–24 V DC with standard industrial tolerances.
Q4. How much current can each output deliver?
Each output can source up to 0.5 A, with the group rated up to 2 A total.
Q5. Does this module have electrical isolation?
Yes; it uses optical isolation between field outputs and the backplane/frame for noise immunity and safety.
Q6. What protection indicators are included?
It has individual LEDs to show the ON/OFF status of each output channel.
Q7. Where is this module installed?
It plugs into a compatible RX3i PLC backplane slot and is hot‑swappable within supported racks.
Q8. What kinds of loads is it suitable for?
It is used for low‑voltage DC loads such as solenoids, indicators, relays, or small actuators in industrial control systems.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
