Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model Number | DS200IQXDG1AAA |
| Product Type | Inverter Snubber / Protection Board |
| Series | Speedtronic Mark V (DS200 Series) |
| Function | Snubber and surge suppression for inverter/IGBT drive circuits in Mark V turbine control systems |
| Typical Use | Protection of power electronics and conditioning of switch node signals |
| Backplane Interface | Rack‑mount printed circuit board integrated into Mark V control cabinet |
| Signal Types | High‑speed transient suppression and noise filtering |
| Power Supply | Powered from internal Mark V backplane supply |
| Status Indicators | Diagnostic LEDs or test points (board dependent) |
| Operating Temperature | Typical industrial range (approx. −20 °C to +60 °C) |
| Humidity | 5 % – 95 % non‑condensing |
| Mounting | Printed circuit board installed in rack chassis |
| Dimensions (approx.) | ~159 mm × ~127 mm × ~25 mm (6.25″ × 5″ × 1″) |
| Weight | < 1 kg (under 2 lbs) |
| Status | Legacy Mark V board, often available refurbished |
FAQ
FAQ
Q1. What is the DS200IQXDG1AAA board used for?
It is an inverter snubber and protection board that helps suppress voltage spikes and noise in inverter/IGBT drive sections of GE Mark V Speedtronic systems.
Q2. Which GE control platform does this part belong to?
It belongs to the Speedtronic Mark V turbine control series, specifically the DS200 family of modules.
Q3. What is the main function of a snubber board?
It provides transient suppression and conditioning to protect sensitive power electronics during switching events and high‑frequency operations.
Q4. Does it require external power?
No, it draws necessary power from the internal Mark V backplane/system supply.
Q5. What environmental conditions can it operate in?
It is designed for standard industrial environments, typically between −20 °C and +60 °C with normal humidity ranges.
Q6. How is the DS200IQXDG1AAA mounted?
It mounts inside the Mark V control rack as a printed circuit board interfacing with the system backplane.
Q7. What are its approximate dimensions?
The board is approximately 159 mm by 127 mm and about 25 mm thick.
Q8. How much does this board weigh?
It weighs less than 1 kg (under about 2 lbs).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
