Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Bently Nevada 86517-01-01-01-01 |
| Product ID | 86517-01-01-01-01 |
| Manufacturer | Bently Nevada |
| Product Type | Proximity Probe Assembly (3300 XL System Accessory) |
| Series | 3300 XL Proximity Transducer System |
| Function | Non-contact measurement of shaft vibration and position in rotating machinery |
| Probe Type | 3300 XL 8 mm Proximity Probe Assembly |
| Configuration Code | 01-01-01-01 (standard mechanical + electrical configuration) |
| Thread Type | 1/4-28 UNF (typical for 3300 XL probes) |
| Cable Type | 75 Ω coaxial integral cable (system dependent) |
| Connector Type | Miniature ClickLoc™ connector |
| Measurement Technology | Eddy current proximity measurement |
| Sensitivity | 200 mV/mil (7.87 V/mm) |
| Linear Range | 2 mm (80 mils) |
| Frequency Response | 0 Hz to 10 kHz |
| Operating Temperature | −40°C to +120°C |
| Storage Temperature | −51°C to +177°C |
| Probe Material | Stainless steel probe body |
| Tip Material | Polyphenylene sulfide (PPS) |
| System Compatibility | Bently Nevada 3300 XL Proximitor® and extension cable system |
| Application | Turbines, compressors, pumps, motors, gearboxes, rotating machinery monitoring |
| Installation Type | Threaded mounting into machine housing |
| Environmental Rating | Industrial / hazardous-area compatible depending on system configuration |
| Dimensions | Approx. Ø8 mm probe body, length configuration dependent |
| Weight | Approx. 0.1–0.3 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Bently Nevada 86517-01-01-01-01 used for?
It is a 3300 XL proximity probe assembly used for non-contact measurement of shaft vibration, position, and dynamic displacement in rotating machinery.
Q2: What does the 01-01-01-01 configuration mean?
It typically represents standardized options for mechanical configuration, cable/connector arrangement, and system compatibility within the 3300 XL probe ordering structure.
Q3: What technology does it use?
It uses eddy current sensing technology to measure distance between the probe tip and a conductive target surface.
Q4: Is this a complete system?
No. It is part of a system and must be used with a matching extension cable and Proximitor® sensor.
Q5: What equipment is it compatible with?
It is designed for use with Bently Nevada 3300 XL Proximitor® systems and matching signal conditioning modules.
Q6: Where is it commonly used?
It is widely used in power plants, oil & gas facilities, petrochemical plants, and industrial rotating equipment monitoring.
Q7: What should be checked before replacement?
Verify probe length, connector type, thread specification, system calibration requirements, and compatibility with existing 3300 XL components.
Q8: Does the configuration affect measurement accuracy?
Yes. The probe configuration must match the system calibration to ensure accurate vibration and position measurements.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
