Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Product Name | Emerson KJ4001X1-BA1 |
| Product Type | Terminal Block / I/O Carrier Interface Module |
| Product Series | DeltaV™ S-Series |
| Manufacturer | Emerson |
| System Platform | DeltaV Distributed Control System (DCS) |
| Function | I/O signal termination and field wiring interface |
| Compatible Modules | DeltaV S-Series I/O modules (AI, AO, DI, DO, RTD, etc.) |
| Channel Interface | Field wiring termination points (module-dependent) |
| Signal Type | Analog / Digital / RTD / Thermocouple (depends on paired I/O card) |
| Communication Role | Passive interface (no processing function) |
| System Connection | DeltaV I/O Carrier Backplane |
| Redundancy Support | Supported at system level (not standalone) |
| Field Wiring Method | Screw/plug-in terminal connections |
| Hot Swap Support | Supported when used with DeltaV I/O modules (system dependent) |
| Power Requirement | None (passive module) |
| Power Dissipation | 0 W (passive component) |
| Diagnostics | No direct diagnostics (handled by associated I/O module) |
| Protection Rating | IP20 |
| Mounting Type | DeltaV I/O carrier / baseplate mounted |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5%–95% non-condensing |
| EMC Compliance | IEC 61000 / IEC 61326 (system level) |
| Vibration Resistance | IEC 60068 industrial standard |
| Shock Resistance | 10 g, 11 ms half-sine |
| Application | Field signal wiring for DeltaV DCS systems |
| Country of Origin | USA |
| Dimensions (W × H × D) | Approx. 41 × 107 × 105 mm |
| Weight | Approx. 0.18 kg |
FAQ
FAQ
Q1: What is the KJ4001X1-BA1 used for?
The KJ4001X1-BA1 is a terminal block used in Emerson DeltaV systems to connect field wiring to I/O modules, enabling signal transmission between field devices and the control system.
Q2: Does the KJ4001X1-BA1 process signals?
No. It is a passive interface component and does not perform any signal processing. All processing is handled by the connected I/O module.
Q3: Which modules is it compatible with?
It is used with DeltaV S-Series I/O modules such as analog input, analog output, digital input, digital output, RTD, and thermocouple modules.
Q4: Does it require power supply?
No. The module does not require any external power because it only provides physical wiring termination.
Q5: Can it be replaced while the system is running?
Yes, in DeltaV-supported configurations it can be replaced without affecting system operation when paired with compatible hot-swappable I/O modules.
Q6: What is its role in the DeltaV system?
Its main role is to provide a safe, organized, and reliable interface between field wiring and the DeltaV I/O subsystem.
Q7: What are the dimensions and weight?
It measures approximately 41 × 107 × 105 mm and weighs around 0.18 kg.
Q8: Where is it commonly used?
It is widely used in oil & gas, chemical, power generation, and process industries as part of DeltaV distributed control systems.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
