Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | VE4005S2B1 |
| Manufacturer | Emerson |
| Product Series | DeltaV™ S-Series Traditional I/O |
| Product Type | Analog Output Module |
| Application | Process Control and Field Device Actuation |
| Output Channels | 8 Channels |
| Output Signal Range | 4–20 mA |
| HART Communication | Supported on All Channels |
| Output Resolution | 16-bit |
| Accuracy | ±0.25% of Full Scale |
| Maximum Load | Up to 750 Ω (typical system dependent) |
| Isolation | Channel-to-System Isolation |
| Module Configuration | AO Plus Card with Mass Termination Assembly |
| Terminal Block Type | 8-Channel AO Mass I/O Terminal Block |
| Response Time | < 10 ms |
| Hot-Swap Capability | Supported |
| Communication Interface | DeltaV LocalBus |
| Power Consumption | < 10 W |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% Non-Condensing |
| Mounting Type | DeltaV S-Series Carrier Installation |
| Dimensions (L × W × H) | ~263 mm × 58 mm × 28 mm |
| Weight | ~0.32 kg |
| Country of Origin | United States / Germany (varies by revision) |
| Typical Applications | Control valves, actuators, VFDs, analog process devices |
FAQ
FAQ
Q1: What is the Emerson VE4005S2B1 used for?
The VE4005S2B1 is used to send analog control signals (4–20 mA) from a DeltaV system to field devices such as control valves, actuators, and drives.
Q2: How many output channels does it have?
It provides 8 analog output channels.
Q3: Does the module support HART communication?
Yes, all channels support HART communication for diagnostics, configuration, and monitoring.
Q4: What type of output signal does it provide?
It provides a standard 4–20 mA analog current output used in industrial process control.
Q5: What are the dimensions of the VE4005S2B1?
The module measures approximately 263 mm × 58 mm × 28 mm.
Q6: What is the weight of the module?
The weight is approximately 0.32 kg.
Q7: Can the module be replaced while the system is running?
Yes, it supports hot-swapping, allowing replacement without shutting down the DeltaV system.
Q8: Does it require routine calibration?
No routine calibration is required. Periodic verification of output accuracy and field wiring integrity is recommended for stable operation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
