GE IC200PWR102F Expanded AC Power Supply Module

FAQ

Q1: What is the GE Fanuc IC200PWR102F used for?
The IC200PWR102F is an expanded AC power supply for the VersaMax I/O platform. It provides regulated 5 VDC and 3.3 VDC backplane power for CPUs, Network Interface Units (NIUs), and I/O modules installed in a VersaMax station.

Q2: What input voltage does the IC200PWR102F support?
The module accepts 85–132 VAC (120 VAC nominal) when the voltage-selection jumper is installed, or 176–264 VAC (240 VAC nominal) when the jumper is removed. It operates over a frequency range of 47–63 Hz.

Q3: What output power does the IC200PWR102F provide?
The module supplies regulated 5 VDC and 3.3 VDC outputs with a maximum combined output current of 1.5 A. The 3.3 VDC output can deliver up to 1.0 A, with the remaining capacity available on the 5 VDC output.

Q4: Can the IC200PWR102F be used as a secondary power supply?
Yes. In addition to serving as the primary power supply for a VersaMax station, the IC200PWR102F can also be installed on a Power Supply Booster Carrier to provide supplemental backplane power for larger I/O systems.

Q5: What protection features are built into the IC200PWR102F?
The module includes short-circuit and overload protection, helping safeguard both the power supply and connected VersaMax modules during abnormal operating conditions.

Q6: How is the input voltage selected?
For 120 VAC operation, the input-selection jumper must be installed. For 240 VAC operation, the jumper must be removed. Using the incorrect jumper setting may damage the module or prevent normal operation.

Q7: What does the “F” revision indicate?
The “F” suffix identifies the hardware revision of the IC200PWR102 power supply. Revision F remains fully compatible with VersaMax systems and primarily reflects production and reliability improvements rather than changes to electrical performance.

Q8: What should be checked before replacing an IC200PWR102F module?
Before replacement, verify the VersaMax carrier compatibility, input voltage selection (120 VAC or 240 VAC), jumper position, total backplane power requirements, wiring connections, and the installed CPU/NIU configuration. Confirming these items helps ensure reliable power distribution and uninterrupted system operation.

GE IC200PWR102F

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.