Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc (now Emerson Automation) |
| Product Model | IC200MDL750J |
| Product Type | Discrete DC Output Module |
| Series | VersaMax I/O |
| Function | Provides digital DC output signals for controlling external field devices |
| Output Type | Positive Logic (Sourcing) DC Output |
| Number of Output Points | 32 points |
| Output Groups | 2 groups of 16 outputs |
| Rated Output Voltage | 12/24 VDC nominal |
| Output Voltage Range | +10.2 to +30 VDC |
| Output Current | 0.5 A maximum per point |
| Maximum Inrush Current | 2.0 A maximum for 100 ms |
| Output Voltage Drop | 0.3 V maximum |
| Output Leakage Current | 0.5 mA maximum at 30 VDC |
| ON Response Time | 0.2 ms maximum |
| OFF Response Time | 1.0 ms maximum |
| Isolation | 250 VAC continuous; 1500 VAC for 1 minute (field side to logic/frame ground) |
| Group-to-Group Isolation | 250 VAC continuous; 1500 VAC for 1 minute |
| Point-to-Point Isolation | None |
| External Power Supply | +10.2 to +30 VDC (12/24 VDC nominal) |
| Backplane Current Consumption | 90 mA maximum @ 5 VDC |
| Protection | External suppression recommended for inductive loads |
| Internal Fuse | None |
| Status Indicators | Individual output LEDs, OK LED, FLD PWR LED |
| Module ID | 80808080 |
| Mounting Method | VersaMax I/O Carrier Base |
| Compatible Systems | GE Fanuc / Emerson VersaMax PLC and Distributed I/O |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5–95% RH, non-condensing |
| Dimensions (H × W × D) | Approx. 110 × 66.8 × 50 mm (4.33 × 2.63 × 1.97 in.) |
| Weight | Approx. 0.14 kg (0.31 lb) |
| Hardware Revision | J |
| Typical Applications | Solenoid Valves, Relays, Contactors, Indicator Lamps, DC Actuators |
| Warranty | 12 Months |
FAQ
FAQ
Q1: What is the GE Fanuc IC200MDL750J used for?
The IC200MDL750J is a VersaMax 32-point discrete DC output module used to control external field devices by providing ON/OFF switching signals from a PLC or network interface unit. Typical applications include solenoid valves, relays, contactors, and indicator lamps.
Q2: How many output channels does the IC200MDL750J provide?
The module provides 32 positive logic output points, arranged as two groups of 16 outputs. This high-density design allows many DC devices to be controlled within a compact VersaMax I/O station.
Q3: What voltage and current ratings are supported by the IC200MDL750J?
The module supports 12/24 VDC nominal operation with an output voltage range of +10.2 to +30 VDC. Each output point can handle up to 0.5 A of load current.
Q4: Does the IC200MDL750J require an external power supply?
Yes. The field load power must be supplied by an external +10.2 to +30 VDC power source. The VersaMax backplane provides power only for the module electronics.
Q5: What type of loads can be connected to the IC200MDL750J?
The module is suitable for switching DC loads such as solenoid valves, relay coils, contactors, pilot lamps, and other industrial devices requiring 12/24 VDC control signals.
Q6: Does the IC200MDL750J provide electrical isolation?
Yes. The module provides optical isolation between the user field circuits and internal logic, rated at 250 VAC continuous and 1500 VAC for one minute. The two output groups are also isolated from each other, while individual output points are not isolated.
Q7: What do the LEDs on the IC200MDL750J indicate?
Each output channel has an individual LED showing its ON/OFF status. The OK LED indicates backplane power availability, while the FLD PWR LED indicates the presence of external field power.
Q8: What should be checked before replacing an IC200MDL750J module?
Before replacement, verify the VersaMax carrier compatibility, external 12/24 VDC power supply, output wiring, load current requirements, PLC hardware configuration, and field device connections to ensure correct operation after installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
