Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc (now Emerson Automation) |
| Product Model | IC693CMM321-EE |
| Product Type | Ethernet Interface Module |
| Series | Series 90-30 PLC |
| Function | Provides Ethernet TCP/IP communication capability for Series 90-30 PLC systems |
| Communication Protocol | TCP/IP Ethernet |
| Network Interface | Ethernet LAN Interface |
| Ethernet Port | 10Base-T RJ-45 port |
| Auxiliary Ethernet Port | AAUI 14-pin transceiver port |
| Serial Interface | RS-232 Station Manager Port (RJ-11) |
| Communication Mode | Client / Server communication |
| Server Connections | Up to 16 simultaneous server connections |
| PLC Communication | COMMREQ function block supported |
| Host Communication | Supports communication with host computers and other PLC devices |
| Supported Devices | Series 90-30 PLCs and compatible Ethernet-enabled control devices |
| Installation Location | Series 90-30 PLC baseplate I/O slot |
| Number of Modules per System | Up to 2 Ethernet Interface modules per Series 90-30 system |
| LED Indicators | OK, LAN, FDX, STAT |
| Diagnostics | Ethernet status monitoring, station management, communication diagnostics |
| Station Manager | Built-in RS-232 maintenance and diagnostic interface |
| Power Consumption | Approx. 450 mA @ 5 VDC |
| Backplane Power Requirement | 5 VDC supplied from Series 90-30 backplane |
| Isolation | 1500 VAC (logic to field/network interface) |
| Compatible PLC Series | GE Fanuc Series 90-30 |
| Configuration Method | PLC programming software and Station Manager commands |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5–95% RH (non-condensing) |
| Dimensions (H × W × D) | Approx. 130 × 40 × 130 mm (5.12 × 1.57 × 5.12 in.) |
| Weight | Approx. 0.64 kg (1.41 lb) |
| Hardware Revision | EE |
| Product Status | Legacy Product |
| Warranty | 12 Months |
FAQ
FAQ
Q1: What is the GE Fanuc IC693CMM321-EE used for?
The IC693CMM321-EE is an Ethernet communication module used to connect a Series 90-30 PLC system to an Ethernet LAN. It allows the PLC to exchange data with host computers, other PLCs, and industrial control devices.
Q2: What communication protocols does the IC693CMM321-EE support?
The module supports TCP/IP Ethernet communication and provides client/server functionality. The PLC can initiate communications with other devices or respond to requests from external systems.
Q3: What Ethernet connections are available on the IC693CMM321-EE?
The module provides a 10Base-T RJ-45 Ethernet port for direct network connection and an AAUI port for connection through an external Ethernet transceiver.
Q4: Can the IC693CMM321-EE communicate with multiple devices at the same time?
Yes. The Ethernet Interface supports multiple simultaneous communication sessions and can handle up to 16 server connections, allowing communication with multiple hosts or PLC devices.
Q5: Where is the IC693CMM321-EE installed?
The module is installed directly into a GE Fanuc Series 90-30 PLC baseplate. It occupies a standard PLC module slot and receives power from the backplane.
Q6: What diagnostic features are available on the IC693CMM321-EE?
The module includes LED indicators for OK, LAN, FDX, and STAT status monitoring. The built-in Station Manager RS-232 port provides additional configuration and troubleshooting functions.
Q7: What does the “EE” revision indicate?
The “EE” suffix identifies the hardware revision of the IC693CMM321 Ethernet Interface module. Different revisions represent production updates while maintaining compatibility with Series 90-30 PLC systems.
Q8: What should be checked before replacing an IC693CMM321-EE module?
Before replacement, verify the Series 90-30 PLC compatibility, Ethernet network configuration, IP address settings, communication parameters, installed firmware requirements, and PLC program communication instructions to ensure proper network operation after installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
