Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc (now Emerson Automation) |
| Product Model | IC693CMM321-BA |
| Product Type | Ethernet Interface Module |
| Series | Series 90-30 |
| Function | Provides Ethernet TCP/IP communication capability for Series 90-30 PLC systems |
| Communication Protocol | SRTP (Service Request Transport Protocol) over TCP/IP |
| Supported Communication | PLC-to-PC, PLC-to-PLC, HMI/SCADA communication, programming communication |
| Maximum Server Connections | 16 connections |
| Network Interface | AAUI Ethernet Port (requires external transceiver) |
| Serial Port 1 | RS-232 RJ-11 Station Manager Port |
| Serial Port 2 | RS-485 15-pin D-type Software Loader Port |
| Number of Ports | 3 ports |
| LED Indicators | 4 status LEDs (OK, LAN, SER, STAT) |
| Compatible PLC Series | GE Fanuc Series 90-30 PLC |
| Compatible CPU | CPU firmware version 6.50 or higher for full functionality; earlier versions support limited operation |
| Installation Position | Any Series 90-30 baseplate slot |
| Module Width | Single-slot module |
| Power Consumption | 700 mA maximum @ 5 VDC |
| External Power Supply | Supplied through PLC backplane |
| Configuration Software | Logicmaster 90-30, VersaPro, Control software |
| Ethernet Function | Data exchange, remote programming, monitoring, and control communication |
| Isolation | Backplane and communication circuit isolation |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5–95% RH (non-condensing) |
| Dimensions (H × W × D) | Approx. 110 × 66.8 × 50 mm (4.33 × 2.63 × 1.97 in.) |
| Weight | Approx. 0.23 kg (0.50 lb) |
| Hardware Revision | BA |
| Product Status | Legacy Product |
| Warranty | 12 Months |
FAQ
FAQ
Q1: What is the GE Fanuc IC693CMM321-BA used for?
The IC693CMM321-BA is used to add Ethernet communication capability to GE Fanuc Series 90-30 PLC systems. It allows PLCs to communicate with computers, HMIs, SCADA systems, and other controllers through an Ethernet network.
Q2: What communication protocols does the IC693CMM321-BA support?
The module supports Ethernet communication using SRTP (Service Request Transport Protocol) over TCP/IP, which is used for PLC data exchange, programming access, and supervisory communication.
Q3: How many devices can connect to the IC693CMM321-BA at the same time?
The module supports up to 16 server connections, allowing multiple devices such as computers, HMIs, or other PLCs to communicate with the Series 90-30 controller simultaneously.
Q4: What communication ports are available on the IC693CMM321-BA?
The module provides three communication interfaces: an AAUI Ethernet port, an RS-232 RJ-11 Station Manager port, and an RS-485 15-pin D-type software loader port.
Q5: Which PLC systems are compatible with the IC693CMM321-BA?
The IC693CMM321-BA is designed for GE Fanuc Series 90-30 PLC systems. Full functionality is recommended with Series 90-30 CPUs running firmware version 6.50 or higher.
Q6: What are the functions of the LED indicators on the IC693CMM321-BA?
The module includes four LED indicators: OK for module status, LAN for Ethernet activity, SER for serial communication status, and STAT for status or diagnostic information.
Q7: Does the IC693CMM321-BA require an external power supply?
No. The module receives power from the Series 90-30 PLC backplane and does not require a separate external power supply.
Q8: What should be checked before replacing an IC693CMM321-BA module?
Before replacement, verify the Series 90-30 rack compatibility, CPU firmware version, Ethernet network settings, communication cables, transceiver requirements, and PLC configuration software settings to ensure proper communication after installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
