Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Details |
|---|---|
| Manufacturer | Bently Nevada |
| Product Number | 200150-18-CN |
| Product Type | Accelerometer |
| Product Series | 200150 Accelerometer |
| Product Family | Trendmaster 2000 / Trendmaster Pro |
| Application | General-purpose machinery vibration monitoring |
| Measurement Principle | Piezoelectric acceleration measurement |
| Sensing Element | Ceramic |
| Sensing Geometry | Shear |
| Sensitivity | 10.2 mV/(m/s²), nominally 100 mV/g |
| Measurement Range | ±245 m/s² (±25 g) |
| Frequency Range | 10 Hz to 10 kHz |
| Mounted Resonant Frequency | >20 kHz |
| Amplitude Linearity | ±2% from 1 to 10 g peak |
| Transverse Sensitivity | ≤7% |
| Excitation Voltage | 4.7–5.5 V DC |
| Quiescent Current | <800 μA |
| Output Bias Voltage | +2.5 ±0.23 V DC |
| Electrical Isolation | 600 Vrms |
| Axial Shock Limit | 49,050 m/s² peak (5,000 g peak) |
| Operating Temperature | -40 to +105°C (-40 to +221°F) |
| Relative Humidity | 100% RH, condensing, non-submerged |
| Housing Material | 316L stainless steel |
| Mounting Thread | 3/8-24 female |
| Mounting Configuration | 3/8-24 mounting stud |
| Mounting Torque | 2.7–6.8 N·m (2–5 ft·lbf) |
| Electrical Connector | 5-pin, 1/2-20 |
| Cable | 4-conductor, 22 AWG, braided shield with drain wire |
| Maximum Cable Length | 25 m (82 ft) |
| Compatible Systems | Trendmaster 2000, Trendmaster Pro and compatible monitoring systems |
| Dimensions | Approx. 17.5 mm hex × 45.7 mm height |
| Weight | Approx. 0.058 kg (58 g) |
| Origin | USA |
FAQ
FAQ
Q1: What is the Bently Nevada 200150-18-CN used for?
A: The 200150-18-CN is used to measure vibration acceleration on industrial machinery. Typical applications include monitoring motors, pumps, fans, gearboxes and other rotating equipment.
Q2: What type of sensing element does the 200150-18-CN use?
A: It uses a ceramic piezoelectric sensing element with shear sensing geometry, providing stable vibration measurements over a broad frequency range.
Q3: What is the measurement range of the 200150-18-CN?
A: The sensor has a nominal measurement range of ±25 g (±245 m/s²) and a sensitivity of approximately 100 mV/g.
Q4: What is the frequency range of the 200150-18-CN?
A: The specified frequency range is approximately 10 Hz to 10 kHz, allowing the accelerometer to detect a wide range of machinery vibration frequencies.
Q5: What mounting connection does the 200150-18-CN use?
A: The accelerometer uses a 3/8-24 female mounting thread with the associated mounting hardware. The recommended mounting torque is approximately 2.7–6.8 N·m.
Q6: What is the operating temperature range?
A: The 200150-18-CN is designed for operation from approximately -40°C to +105°C (-40°F to +221°F), making it suitable for demanding industrial environments.
Q7: What are the dimensions and weight of the 200150-18-CN?
A: The accelerometer is approximately 17.5 mm hex × 45.7 mm high and weighs approximately 0.058 kg (58 g).
Q8: Which monitoring systems can be used with the 200150-18-CN?
A: The 200150 accelerometer family is designed for use with compatible Bently Nevada Trendmaster 2000 and Trendmaster Pro monitoring systems. The complete sensor and monitoring-system configuration should be checked before installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
