Allen Bradley 20BD014A0AYNAND0NNAD PowerFlex 700

FAQ

Q1: What is the Allen-Bradley 20BD014A0AYNAND0NNAD?

A: The Allen-Bradley 20BD014A0AYNAND0NNAD is a PowerFlex 700 AC drive designed to control the speed and torque of three-phase AC motors. Its listed normal-duty power rating is 10 HP (7.5 kW), with a rated output current of 14 A. It supports sensorless vector, V/Hz, and vector control modes for different motor-control requirements.

Q2: What are the input and output electrical ratings of this drive?

A: The drive is specified for a three-phase input voltage range of 380–480 VAC at 60 Hz, with a rated input current of 14.7 A and input power of 10.4 kVA at 480 VAC. Its output voltage range is 0–460 VAC, with a rated output current of 14 A. The listed short-duration current ratings are 16.5 A for one minute and 22 A for three seconds. These overload ratings should be applied only under the conditions specified by the manufacturer.

Q3: What motor-control and regulation capabilities does the 20BD014A0AYNAND0NNAD offer?

A: The drive supports sensorless vector control, V/Hz control, and vector control. The stated speed regulation is 0.1% of base speed in vector control without feedback, while torque regulation is listed as ±5% without feedback. These capabilities help provide controlled motor speed and torque, but actual performance depends on motor characteristics, parameter tuning, load conditions, and the selected control mode.

Q4: What communication options are available?

A: The supplied specifications list DeviceNet and EtherNet/IP protocol support, an RS-485 communication interface, and no internal communication module. These details should be checked carefully before integrating the drive into a control network. Protocol support, physical interface, and optional communication hardware are not interchangeable; confirm the exact communication adapter or module required for the intended PLC or industrial network.

Q5: Does this drive support dynamic braking?

A: Yes. The specifications indicate that a brake IGBT is installed, but no internal braking resistor is included. A compatible external braking resistor may be needed to dissipate regenerated energy during deceleration. The resistor’s resistance, power rating, duty cycle, and compatibility must be confirmed against the manufacturer’s instructions and the application’s stopping requirements.

Q6: What protection and stopping functions does the drive provide?

A: The listed protection and control features include Class 10 motor overload protection, programmable current limiting from 20% to 160% of rated output current, and input undervoltage and overvoltage trip functions. Programmable stop modes include coast, DC brake, fast brake, ramp-to-hold, and S-curve stopping. The available functions and their behavior depend on parameter settings and the configured drive hardware.

Q7: What are the operating environment and installation requirements?

A: The specified operating temperature is 0–50 °C, relative humidity is 5–95% non-condensing, and the maximum installation altitude without derating is 1000 m. The enclosure rating is IP20 / NEMA/UL Type 1, which is intended for indoor installation and does not provide protection against water ingress. Ensure adequate ventilation, electrical clearances, grounding, and suitable cabinet protection. The listed short-circuit and trip ratings should also be verified against the applicable installation manual.

Q8: What are the dimensions and weight of the 20BD014A0AYNAND0NNAD?

A: The supplied dimensions are 336 × 200 × 135 mm (H × W × D), and the weight is 7.03 kg. The dimensions and weight are useful for cabinet layout, mounting, transport, and replacement planning. Before installation, confirm the required clearances, mounting orientation, terminal access, and ventilation requirements using the manufacturer’s documentation for the exact catalog number.

20BD014A0AYNAND0NNAD Allen Bradley

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.