Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
Allen-Bradley |
|
Product Series |
PowerFlex 700 |
|
Catalog Number |
|
|
Product Type |
AC Drive / Adjustable Frequency Drive |
|
Drive Type |
PowerFlex 700 Type 20B |
|
Input Voltage |
540 V DC |
|
Input Type |
DC bus input with pre-charge |
|
Continuous Output Current |
205 A |
|
Normal Duty Power Rating |
110 kW (approximately 150 HP) |
|
Heavy Duty Power Rating |
90 kW (approximately 125 HP) |
|
Output Voltage |
0 V to rated motor voltage |
|
Output Phase |
3-phase |
|
Maximum Output Frequency |
420 Hz |
|
Overload Capacity |
110% for up to 1 minute; 150% for up to 3 seconds |
|
Control Method |
Sensorless Vector, Vector Control, and V/Hz |
|
Control I/O |
Vector control with 24 V DC I/O |
|
Analog Inputs |
2 |
|
Analog Outputs |
2 |
|
Digital Inputs |
6 |
|
Digital Outputs |
3 |
|
Human Interface Module (HIM) |
Not included; blank plate installed |
|
Communication Module |
Not included |
|
Feedback Option |
No feedback |
|
Brake IGBT |
Not included |
|
Internal Brake Resistor |
Not included |
|
EMC Filter |
EMC filter with common-mode choke |
|
Enclosure Rating |
IP20 / NEMA/UL Type 1 |
|
Conformal Coating |
Included |
|
Carrier Frequency |
2, 4, 8, and 10 kHz; drive rating based on 4 kHz |
|
Efficiency |
Approximately 97.5% at rated current and nominal voltage |
|
Displacement Power Factor |
0.98 |
|
Motor Overload Protection |
Class 10 in vector control mode |
|
Programmable Current Limit |
20–160% of rated output current |
|
Instantaneous Current Limit |
220–300%, depending on drive rating |
|
Acceleration/Deceleration |
Two independently programmable times, 0–3600 seconds |
|
Power Ride-Through |
15 ms at full load |
|
Maximum Short-Circuit Rating |
Up to 200,000 A symmetrical, subject to specified protection requirements |
|
Maximum Installation Altitude |
1,000 m (3,300 ft) without derating |
|
Operating Temperature |
0–50°C (32–122°F), subject to installation conditions |
|
Relative Humidity |
5–95%, non-condensing |
|
Frame Size |
Frame 6 |
|
Drive Dimensions (H × W × D) |
Exact IP20 drive dimensions require confirmation from the applicable dimensional drawing |
|
Drive Weight |
Exact IP20 drive-only weight requires confirmation from the applicable dimensional drawing |
|
Standalone IP54 / NEMA Type 12 Enclosure Dimensions |
1828.8 × 711.3 × 487.8 mm (H × W × D) |
|
Standalone Enclosure Weight |
Approximately 229.07 kg (505 lb), including drive and packaging |
|
Product Lifecycle |
Discontinued |
|
Typical Applications |
Industrial motor control, conveyors, pumps, fans, compressors, and process machinery |
FAQ
FAQ
Q1: What is the Allen-Bradley 20BP205A0ANNANC0?
A: The 20BP205A0ANNANC0 is an Allen-Bradley PowerFlex 700 adjustable frequency drive designed for industrial motor speed and torque control. It uses a 540 V DC bus input with pre-charge and provides a continuous output current rating of 205 A.
Q2: What are the power ratings of this drive?
A: The drive is rated at 110 kW for normal-duty applications and 90 kW for heavy-duty applications. The appropriate rating depends on motor requirements, load characteristics, and operating conditions.
Q3: Does the 20BP205A0ANNANC0 require a DC bus supply?
A: Yes. This configuration is designed for a 540 V DC input and includes pre-charge. The DC supply, protective devices, and pre-charge arrangement must comply with the manufacturer’s installation requirements.
Q4: Does this model include a Human Interface Module or communication module?
A: No. It is supplied with a blank plate instead of a Human Interface Module and does not include an internal communication module. Compatible accessories may be required for local programming or network integration.
Q5: Does the drive support encoder feedback?
A: This configuration is specified without feedback. It supports sensorless vector control, vector control, and V/Hz control. Applications requiring closed-loop encoder feedback should use a compatible feedback-equipped configuration.
Q6: Does this model include dynamic braking hardware?
A: No. The 20BP205A0ANNANC0 does not include a brake IGBT or an internal brake resistor. Applications requiring dynamic braking need a separately selected compatible braking solution.
Q7: What are the dimensions and weight of the 20BP205A0ANNANC0?
A: The exact drive-only dimensions and weight should be confirmed using the applicable dimensional drawing. The published dimensions of 1828.8 × 711.3 × 487.8 mm and weight of 229.07 kg apply to the standalone IP54 / NEMA Type 12 enclosure, including the drive and packaging, rather than the bare IP20 drive.
Q8: Is the 20BP205A0ANNANC0 still available as a new product?
A: The PowerFlex 700 Type 20B series was discontinued on November 30, 2023. Availability may depend on remaining inventory, refurbished equipment, or industrial automation suppliers. Verify the catalog number, hardware condition, and electrical compatibility before purchasing a replacement.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
