Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
Allen-Bradley |
|
Product Series |
PowerFlex 700 |
|
Catalog Number |
|
|
Product Type |
Adjustable Frequency Drive |
|
Drive Type |
PowerFlex 700 Type 20B |
|
Input Voltage |
540 V DC |
|
Input Type |
DC bus input with pre-charge |
|
Continuous Output Current |
260 A |
|
Normal Duty Power Rating |
132 kW (approximately 180 HP) |
|
Heavy Duty Power Rating |
110 kW (approximately 150 HP) |
|
Output Voltage |
0 V to rated motor voltage |
|
Output Phase |
3-phase |
|
Maximum Output Frequency |
420 Hz |
|
Control Method |
Sensorless Vector, Vector Control, and V/Hz |
|
Control I/O |
Vector control with 24 V DC I/O |
|
Analog Inputs |
2 |
|
Analog Outputs |
2 |
|
Digital Inputs |
6 |
|
Digital Outputs |
3 |
|
Human Interface Module (HIM) |
Not included; blank plate installed |
|
Communication Module |
Not included |
|
Feedback Option |
No feedback |
|
Brake IGBT |
Not included |
|
Internal Brake Resistor |
Not included |
|
EMC Filter |
EMC filter with common-mode choke |
|
Enclosure Rating |
IP20 / NEMA/UL Type 1 |
|
Conformal Coating |
Included |
|
Carrier Frequency |
2, 4, 8, and 10 kHz |
|
PWM Frequency |
2 kHz at 540 V DC |
|
Efficiency |
Approximately 97.5% at rated current and nominal voltage |
|
Displacement Power Factor |
Approximately 0.98 |
|
Motor Overload Protection |
Class 10 in vector control mode |
|
Programmable Current Limit |
20–160% of rated output current |
|
Acceleration/Deceleration |
Two independently programmable times, 0–3600 seconds |
|
Power Ride-Through |
15 ms at full load |
|
Maximum Short-Circuit Rating |
Up to 200,000 A symmetrical, subject to specified protection requirements |
|
Maximum Installation Altitude |
1,000 m (3,300 ft) without derating |
|
Operating Temperature |
0–50°C (32–122°F), subject to installation conditions |
|
Relative Humidity |
5–95%, non-condensing |
|
Frame Size |
Frame 6 |
|
Drive Dimensions (H × W × D) |
Confirm exact IP20 dimensions using the applicable Frame 6 dimensional drawing |
|
Drive Weight |
Confirm exact drive-only weight using the applicable dimensional drawing |
|
Standalone IP54 / NEMA Type 12 Enclosure Dimensions |
1828.8 × 711.3 × 487.8 mm (H × W × D) |
|
Standalone Enclosure Weight |
Approximately 229.07 kg (505 lb), including drive and packaging |
|
Product Lifecycle |
Discontinued |
|
Typical Applications |
Industrial motor control, conveyors, pumps, fans, compressors, and process machinery |
FAQ
FAQ
Q1: What is the Allen-Bradley 20BP260A0ANNANC0?
A: The 20BP260A0ANNANC0 is an Allen-Bradley PowerFlex 700 adjustable frequency drive designed for industrial motor speed and torque control. It uses a 540 V DC bus input with pre-charge and provides a continuous output current rating of 260 A.
Q2: What are the power ratings of this drive?
A: The drive is rated at 132 kW for normal-duty applications and 110 kW for heavy-duty applications. The correct rating depends on motor requirements, load characteristics, and overload conditions.
Q3: What input power does the 20BP260A0ANNANC0 require?
A: This model requires a 540 V DC bus input and includes a pre-charge arrangement. The DC supply, protective devices, and pre-charge system must be compatible with the manufacturer’s installation requirements.
Q4: Does this model include a Human Interface Module or communication module?
A: No. This configuration is supplied with a blank plate instead of a Human Interface Module and does not include an internal communication module. Compatible accessories may be required for local programming or network integration.
Q5: Does the drive support encoder feedback?
A: This configuration is specified without feedback. It supports sensorless vector control, vector control, and V/Hz control. Applications requiring closed-loop encoder feedback should use a compatible feedback-equipped configuration.
Q6: Does the 20BP260A0ANNANC0 include dynamic braking hardware?
A: No. The standard configuration does not include a braking IGBT or an internal brake resistor. A compatible external braking solution must be selected separately if dynamic braking is required.
Q7: What are the dimensions and weight of the 20BP260A0ANNANC0?
A: The exact drive-only dimensions and weight should be confirmed using the applicable Frame 6 dimensional drawing. The dimensions of 1828.8 × 711.3 × 487.8 mm and weight of 229.07 kg apply to the standalone IP54 / NEMA Type 12 enclosure, including the drive and packaging, rather than the bare IP20 drive.
Q8: Is the 20BP260A0ANNANC0 still available as a new product?
A: The PowerFlex 700 Type 20B series was discontinued on November 30, 2023. Availability may depend on remaining inventory, refurbished equipment, or industrial automation suppliers. Verify the exact catalog number, hardware condition, and compatibility before purchasing a replacement.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
