Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter Category | Specification |
|---|---|
| Model | 330101-00-13-10-02-00 |
| Probe Type | 3300 XL 8 mm non-contact eddy current proximity probe |
| Total Cable Length | 1.0 meter |
| Total Weight | 0.323 kg |
| Linear Range | 2 mm (80 mils), from 0.25 mm to 2.3 mm |
| Recommended Gap | -9 VDC (approximately 1.27 mm) |
| Incremental Scale Factor | 7.87 V/mm ±5% (1 m standard system) |
| Deviation from DSL | Less than ±0.025 mm (1 m standard system) |
| Probe Tip Material | PPS |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Probe Cable Type | 75Ω triaxial cable with FEP insulation |
| Minimum Target Size | 15.2 mm (0.6 in) diameter, flat metallic target |
| Recommended Shaft Dia. | Minimum 50.8 mm, recommended ≥76.2 mm |
| Operating Temperature | -52°C to +177°C (standard) |
| Storage Temperature | -52°C to +177°C |
| Humidity Tolerance | <3% ASF deviation under 93% RH (56 days) |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Power Requirements | -17.5 VDC to -26 VDC, 12 mA max |
FAQ
Frequently Asked Questions (FAQ)
Q1: What type of probe is the 330101-00-13-10-02-00?
A1: It is a 3300 XL 8 mm non-contact eddy current proximity probe by Bently Nevada, used for vibration and position measurements.
Q2: Where is this probe typically used?
A2: Commonly used in fluid-film bearing machines for vibration monitoring, position tracking, Keyphasor referencing, and speed measurement.
Q3: What is the linear range of this probe?
A3: The linear range is 2 mm, from approximately 0.25 mm to 2.3 mm.
Q4: Is the probe compliant with API 670?
A4: Yes, the 1-meter standard system fully complies with the mechanical, linearity, and thermal performance criteria of API 670.
Q5: Can the 330101 probe operate independently?
A5: It typically operates as part of a system with a 3300 XL extension cable and Proximitor sensor.
Q6: What is the recommended gap setting?
A6: The recommended gap is approximately 1.27 mm, corresponding to -9 VDC.
Q7: What is the minimum cable bend radius?
A7: The minimum bend radius is 25.4 mm (1.0 inch).
Q8: Does the probe support environmental protection options?
A8: Yes, it is available with connector protectors and is recommended for harsh environments.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
