Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | 330104-00-15-10-01-05 |
| Probe Type | 3300 XL 8 mm Proximity Probe (M10x1 threaded, armored) |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Probe Case Material | Stainless Steel AISI 303 or 304 |
| Cable Type | 75Ω triaxial, FEP insulated |
| Connector Type | Miniature coaxial ClickLoc connector with protector |
| Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ± 5% (1 or 5 m systems), ± 6.5% (9 m systems) |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap | ~1.27 mm (50 mils) = -9 Vdc |
| Minimum Target Size | 15.2 mm (0.6 in) flat surface |
| Recommended Shaft Diameter | ≥ 76.2 mm (3 in) |
| Frequency Response | 0 – 10 kHz (+0/-3 dB) with up to 305 m (1000 ft) field wiring |
| Operating Temp (Probe) | -52°C to +177°C (Standard), up to +218°C (ETR tip) |
| Operating Temp (Cable) | -52°C to +177°C (Standard), up to +260°C (ETR cable) |
| Operating Temp (Sensor) | -52°C to +100°C |
| Storage Temp (Sensor) | -52°C to +105°C |
| Humidity Resistance | <3% deviation in ASF @ 93% RH for 56 days (IEC 68 2 3) |
| Pressure Seal | Viton® O-ring seal (not pressure tested by default) |
| Field Wiring | 0.2–1.5 mm² (16–24 AWG), shielded triad, max length 305 m (1000 ft) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| System Length | 1.0 meter |
| Total Weight | 0.323 kg |
FAQ
FAQ
Q1: What applications is this probe designed for?
A1: It is primarily used for vibration and position monitoring in fluid-film bearing machines and also supports Keyphasor reference and speed measurements.
Q2: What is the supported operating temperature range?
A2: The standard probe supports –52°C to +177°C. The Extended Temperature Range (ETR) version supports up to +218°C (probe tip) and +260°C (cable).
Q3: Does this model comply with API 670 standards?
A3: Yes, the standard 5-meter system fully meets API 670 specifications for mechanical configuration, linear range, accuracy, and thermal stability.
Q4: Is it compatible with older 3300 series components?
A4: Yes, the 3300 XL 8 mm system is electrically and mechanically interchangeable with legacy 3300 5 mm and 8 mm components.
Q5: What is the recommended gap setting for proper operation?
A5: The recommended gap is approximately 1.27 mm (50 mils), corresponding to –9 Vdc output.
Q6: What is the minimum allowed cable bend radius?
A6: The minimum cable bend radius is 25.4 mm (1.0 inch).
Q7: Does the connector require any tools for installation?
A7: No, the ClickLoc connectors are finger-tight and designed for tool-free installation with a built-in locking mechanism.
Q8: What is the probe’s linear measurement range?
A8: The linear range is from 0.25 mm to 2.3 mm (10 to 90 mils), ensuring precise displacement and vibration measurements.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
