Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | Bently Nevada 330104-00-15-10-02-00 |
| Probe Type | 3300 XL 8 mm Proximity Probe, armored, M10 x 1 thread |
| Total Length | 1.0 meter |
| Weight | 0.323 kg (0.71 lb) |
| Probe Tip Material | PPS (Polyphenylene Sulfide) |
| Case Material | Stainless Steel (AISI 303 or 304) |
| Cable Type | 75Ω Triaxial, FEP-insulated |
| Connector Type | Miniature coaxial ClickLoc connector |
| Linear Range | 2.0 mm (80 mils) |
| Recommended Gap | -9 Vdc (approx. 1.27 mm or 50 mils) |
| Operating Temperature (Probe) | -52°C to +177°C |
| Output Sensitivity | 7.87 V/mm (200 mV/mil) ±5% (standard) |
| Deviation from Best Fit Line (DSL) | < ±0.025 mm (±1 mil) for 1 m systems |
| Minimum Target Size | 15.2 mm (0.6 in) diameter |
| Frequency Response | 0–10 kHz, +0/-3 dB |
| Minimum Shaft Diameter | 50.8 mm (recommended ≥ 76.2 mm) |
| Tensile Strength (probe-to-lead) | 330 N (75 lbf) |
| Connector Torque | 0.565 N·m (5 in·lbf) max |
| Environmental Rating | IP54 or higher with proper installation |
| Certifications | CE, FCC, RoHS, ATEX, IECEx, CSA (available with option code 05) |
FAQ
FAQ
Q1: What type of installation does this probe support?
A1: This model comes with an M10 x 1 metric thread and supports forward-mount installation, ideal for space-limited environments.
Q2: Is it compatible with older non-XL 3300 series components?
A2: Yes, the 3300 XL 8 mm probe is electrically and physically compatible with legacy 3300 5 mm and 8 mm system components.
Q3: What is the recommended gap setting?
A3: The recommended gap is approximately 1.27 mm (50 mils), corresponding to a -9 Vdc output voltage.
Q4: Is system calibration required for each component?
A4: No. The 3300 XL system supports complete interchangeability among the probe, extension cable, and Proximitor without the need for individual calibration.
Q5: Is this probe suitable for high-temperature environments?
A5: The standard model supports up to 177°C. For higher temperature applications, an Extended Temperature Range (ETR) version is available.
Q6: What is the minimum shaft diameter this probe can work with?
A6: The minimum shaft diameter is 50.8 mm (2 in), but ≥76.2 mm (3 in) is recommended to minimize signal interference.
Q7: Are connector protectors included with this probe?
A7: Some configurations include connector protectors; they can also be ordered separately to enhance environmental protection.
Q8: What is the minimum bend radius for the cable?
A8: The minimum allowable bend radius is 25.4 mm (1.0 inch), essential for maintaining signal integrity and mechanical reliability.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
