Yokogawa AND50-562 Node Unit with I/O Module

FAQ

Q1: What types of I/O modules are compatible with the AND50-562 Node Unit?
A1: The AND50-562 supports analog, digital, relay, multiplexer, and communication modules as per installation requirements.

Q2: Is the AND50-562 certified for use in hazardous areas?
A2: Yes, it is certified for Class I, Division 2, Groups A, B, C, and D according to CSA and ISA standards.

Q3: What is the voltage isolation specification for signal channels?
A3: The signal insulation withstands up to 1500 V AC per minute between systems.

Q4: Can I install multiple types of modules in the same nest?
A4: Digital I/O and multiplexer modules cannot be installed together in the same nest; other combinations should follow specific nesting rules.

Q5: How is the unit powered?
A5: The AND50-562 is powered by 5.0 V DC supplied from the Node Interface Unit.

Q6: What is the operating temperature range for this unit?
A6: While not explicitly stated in the summary, it generally follows Yokogawa standard ranges: 0 to 50°C for industrial modules unless otherwise noted.

Q7: Does the AND50-562 provide intrinsic safety (IS) certification?
A7: No, it is non-incendive (NI) compliant, suitable for hazardous locations but not IS-certified.

Q8: What installation guidelines must be followed for CSA compliance?
A8: The AND50-562 must be installed in a CSA-approved cabinet and directly connected to NI-compliant field devices.

AND50 AND50-562 Node Unit with I/O Module Yokogawa

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.