Epro PR6423/10R-131+CON031 8mm Eddy Current Sensor+Signal Converter

FAQ

Q1: What is the primary application of the PR6423/10R-131 with CON031?
A1: It is used for measuring radial/axial shaft displacement, position, and speed in critical turbomachinery such as turbines, compressors, and gearboxes.

Q2: What is the measuring range of this sensor system?
A2: The standard linear measuring range is 2 mm.

Q3: What type of material must the shaft be for optimal sensor performance?
A3: The shaft should be made of ferromagnetic steel, typically 42CrMo4 (AISI 4140).

Q4: Is the system certified for use in hazardous areas?
A4: Yes, it has ATEX, IECEx, and CSA certifications for Intrinsic Safety and Non-sparking areas.

Q5: What is the output voltage range of the CON031 converter?
A5: Depending on power supply, the output range is either -4V to -20V or -2V to -18V.

Q6: What is the frequency response capability of the system?
A6: The system has a frequency range up to 20,000 Hz.

Q7: How is the sensor mounted?
A7: It is mounted using a threaded case (3/8”-24 UNF or M10x1) and typically secured with holders.

Q8: What environmental conditions can this system withstand?
A8: The sensor withstands -35°C to +180°C, and the converter -30°C to +100°C.

8mm Eddy Current Sensor CON031 Epro PR6423/10R-131 Signal Converter

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.