Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | 330101-00-63-10-02-00 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| System Components | Probe only (1.0 meter) without extension cable |
| Total Length | 1.0 meter |
| Weight | 0.323 kg (323 g) |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Cable Type | 75Ω triaxial, FEP insulated standard cable |
| Connector Type | Miniature coaxial ClickLoc connector |
| Torque Rating | 11.2 N·m recommended, max 33.9 N·m for standard forward mount |
| Power Supply | -17.5 Vdc to -26 Vdc, 12 mA max |
| Linear Range | 2 mm (80 mils), 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap | 1.27 mm (50 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) ±5% |
| Deviation from Best Fit Line | ≤ ±0.025 mm (±1 mil) |
| Frequency Response | 0 to 10 kHz, +0/-3 dB |
| Operating Temperature (Probe) | -52°C to +177°C |
| Storage Temperature (Probe) | -52°C to +177°C |
| Relative Humidity (Probe) | ≤3% change in scale factor at 93% RH for 56 days |
| Minimum Target Size | 15.2 mm (0.6 in) diameter flat target |
| Minimum Shaft Diameter | 50.8 mm (2 in); recommended 76.2 mm (3 in) |
| Cable Bend Radius | Minimum 25.4 mm (1.0 in) |
| Environmental Rating | IP54 or better with proper installation |
| Compliance | FCC Part 15, CE (EN 61000-6-2 / 6-4), RoHS, SIL 2/3 capable |
| Certifications | ATEX, IECEx, CSA (various explosion-proof and non-incendive approvals) |
FAQ
FAQ
Q1: What are the primary applications of this probe?
A1: It is mainly used for vibration and position monitoring in fluid-film bearing machinery, as well as Keyphasor and speed measurements.
Q2: Does the 330101-00-63-10-02-00 meet API 670 standards?
A2: Yes, the 3300 XL 8 mm system fully complies with API 670 for mechanical design, linear range, accuracy, and temperature stability.
Q3: Is this model compatible with non-XL 3300 series components?
A3: Yes, it is electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components.
Q4: Is an extension cable required for this version?
A4: No, the 1.0-meter version does not require an extension cable.
Q5: Can the probe operate in high-temperature environments?
A5: Yes, the standard version operates from -52°C to +177°C. For higher temperatures, use the ETR version.
Q6: Does this product offer EMI/RFI protection?
A6: Yes, the 3300 XL Proximitor Sensor provides strong EMI/RFI immunity and meets CE requirements.
Q7: Is special tooling needed for installation?
A7: No, the SpringLoc terminals require no special tools. The probe supports DIN rail and panel mounting.
Q8: How can I prevent oil ingress through the cable?
A8: Use the optional FluidLoc cable to block fluid migration, and apply connector protectors for better environmental sealing.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
