Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Total Length | 1.0 meter |
| Weight | 0.323 kg |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Probe Tip Material | PPS (Polyphenylene Sulfide) |
| Cable Type | 75 Ω triaxial, FEP insulated (standard) |
| Connector Type | Miniature coaxial ClickLoc with protector |
| Connector Material | Gold-plated brass or beryllium copper |
| Operating Temperature (Probe) | -52°C to +177°C |
| Storage Temperature (Probe) | -52°C to +177°C |
| Max Tensile Strength | 330 N (probe to cable), 270 N (cable to connector) |
| Max Connector Torque | 0.565 N·m (5 in·lbf) |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap Voltage | -9 VDC (≈1.27 mm / 50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (1 m or 5 m), ±6.5% (9 m) |
| Deviation from Best Fit Line | ≤ ±0.025 mm (1 m or 5 m), ≤ ±0.038 mm (9 m) |
| Frequency Response | 0 – 10 kHz (+0, -3 dB), with up to 305 m of field wiring |
| Minimum Target Size | 15.2 mm (0.6 in) flat diameter |
| Recommended Shaft Diameter | ≥76.2 mm (3 in), minimum 50.8 mm (2 in) |
| Humidity Resistance | ≤ 3% ASF change at 93% RH per IEC 68-2-3 for 56 days |
| Certification | SIL 2 / SIL 3, RoHS, EMC (EN 61000-6-2, EN 61000-6-4), FCC, ATEX, CSA, IECEx |
FAQ
FAQ
Q1: What is the total length and weight of the probe?
A1: The total length is 1.0 meter, and the weight is 0.323 kg.
Q2: What types of measurements is this probe designed for?
A2: It is designed for vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
Q3: Is the probe compliant with API 670 standards?
A3: Yes, it fully complies with API 670 standards for mechanical configuration, linear range, accuracy, and temperature stability.
Q4: What is the recommended gap voltage for installation?
A4: The recommended gap voltage is -9 VDC, which corresponds to approximately 1.27 mm (50 mils) distance from the target.
Q5: What is the operating temperature range of the probe?
A5: The operating and storage temperature range is -52°C to +177°C.
Q6: Are special tools required to install the connectors?
A6: No, the ClickLoc connectors are designed for tool-free installation using only finger-tight torque.
Q7: Is the probe interchangeable with other systems?
A7: Yes, it is fully interchangeable with 3300 series non-XL 5 mm and 8 mm components, both physically and electrically.
Q8: Does the system support long-distance field wiring?
A8: Yes, the system supports up to 305 meters (1000 feet) of field wiring, but high-frequency signal attenuation should be considered.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
