Bently Nevada 330101-00-67-10-12-CN 3300 XL 8 mm Proximity Probe

FAQ

Q1: Does the 330101-00-67-10-12-CN probe support high-temperature applications?
A1: Yes, the standard model supports up to +177°C. ETR variants can withstand up to +218°C at the probe tip.

Q2: Is this probe compliant with API 670 standards?
A2: Yes, the standard 5-meter system meets API 670 requirements for mechanical design, linear range, accuracy, and temperature stability.

Q3: Can this model be used with non-XL 3300 series components?
A3: Yes, but overall system performance will be limited by the non-XL component’s specifications.

Q4: What are the primary applications of this probe?
A4: It is primarily used for vibration and position monitoring on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.

Q5: Are special tools needed for connector installation?
A5: No, the ClickLoc connectors can be installed by hand and provide a secure “click” lock without tools.

Q6: Is the probe resistant to oil or fluid ingress?
A6: Yes, the optional FluidLoc cable design prevents oil and fluids from leaking through the cable.

Q7: How is signal degradation managed in high-frequency conditions?
A7: Use recommended cable lengths and shielding. Refer to frequency response graphs to adjust wiring for high-frequency applications.

Q8: What is the recommended installation torque for the probe?
A8: The recommended torque is 11.2 N·m (100 in·lbf), not to exceed 33.9 N·m (300 in·lbf).