Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330101-00-96-10-02-CN |
| System Components | Probe (330101), Extension Cable, Proximitor Sensor |
| Probe Tip Diameter | 8 mm (0.31 in) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Probe Cable Type | 75Ω triaxial, FEP insulated |
| Connector Type | Miniature coaxial ClickLoc, gold-plated brass/beryllium copper |
| Standard Cable Length | 1.0 meter (Total Length: 1.0 meter) |
| Weight | 0.323 kg (typical for 1.0 meter system) |
| Linear Range | 0.25 mm to 2.3 mm (10 mils to 90 mils) |
| Recommended Gap Voltage | -9 VDC (≈1.27 mm gap) |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil) ±5% (standard system) |
| Frequency Response | 0 to 10 kHz, +0, -3 dB |
| Operating Temperature Range | -52°C to +177°C (Standard), up to +218°C (ETR) |
| Extension Cable Capacitance | 69.9 pF/m |
| Minimum Cable Bend Radius | 25.4 mm |
| Environmental Protection | IP54 (with proper installation) |
| Regulatory Approvals | CSA, ATEX, IECEx, CE, FCC compliant |
FAQ
FAQ
Q1: What is the primary application of the 330101-00-96-10-02-CN proximity probe?
A1: It is mainly used for vibration and position measurements on fluid-film bearing machines.
Q2: Is the probe interchangeable with other 3300 series components?
A2: Yes, it is fully compatible with non-XL 3300 5 mm and 8 mm components.
Q3: What material is the probe made of?
A3: The probe housing is made from AISI 303 or 304 stainless steel for durability and corrosion resistance.
Q4: What is the recommended gap setting for vibration measurement?
A4: A -9 VDC bias, equivalent to approximately 1.27 mm (50 mils) gap, is recommended.
Q5: Does the probe require calibration for each system?
A5: No, all components are pre-calibrated and interchangeable, eliminating the need for field calibration.
Q6: What is the rated pull strength of the cable?
A6: The cable features 330 N (75 lbf) pull strength between the probe case and cable.
Q7: What is the environmental rating of the connector?
A7: With connector protectors installed, the system offers excellent resistance to environmental contaminants.
Q8: Is the probe suitable for use in hazardous areas?
A8: Yes, it meets ATEX, CSA, IECEx, and other standards for use in hazardous areas.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
