Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330101-01-29-10-01-05 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| System Length | 1.0 meter |
| Total Weight | 0.323 kg |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Case Material | AISI 303 or 304 Stainless Steel |
| Cable Type | 75Ω Triaxial, FEP Insulated |
| Connector Type | Miniature coaxial ClickLoc, gold-plated |
| Minimum Bend Radius | 25.4 mm |
| Operating Temp (Probe) | -52°C to +177°C |
| Operating Temp (Sensor) | -52°C to +100°C |
| Operating Temp (Cable) | -52°C to +177°C |
| Storage Temp (Sensor) | -52°C to +105°C |
| Linear Range | 0.25 mm to 2.3 mm (10 mils to 90 mils) |
| Recommended Gap Setting | 1.27 mm (50 mils), approx. -9 Vdc |
| Scale Factor | 7.87 V/mm (200 mV/mil) ±5% (1 m) |
| Deviation from Straight Line | ±0.025 mm (±1 mil) (1 m system) |
| Frequency Response | 0 to 10 kHz, +0/-3 dB with up to 305 m field wiring |
| Minimum Target Size | 15.2 mm diameter (flat target) |
| Shaft Diameter | ≥50.8 mm (recommended ≥76.2 mm) |
| Pressure Rating | Viton O-ring seal (not factory pressure tested) |
| Humidity Resistance | <3% ASF change @ 93% RH for 56 days |
| Compliance | API 670 compliant, CE, FCC, RoHS, SIL 2/3 |
| Hazardous Area Approvals | CSA, ATEX, IECEx (Class I, Zone 0 & 2, Div 2, T4/T5 rated) |
FAQ
FAQ
Q1: What is the linear measurement range of this probe?
A1: The linear range is from 0.25 mm to 2.3 mm (10 mils to 90 mils).
Q2: What is the recommended gap setting for installation?
A2: The recommended gap setting is approximately 1.27 mm (50 mils), correlating to about -9 Vdc.
Q3: What are the total length and weight of the 330101-01-29-10-01-05?
A3: The total length is 1.0 meter and the total system weight is approximately 0.323 kg.
Q4: Is this probe compliant with the API 670 standard?
A4: Yes, the 3300 XL 8 mm system is fully compliant with API 670 requirements for configuration, range, accuracy, and stability.
Q5: Can this probe operate in high-temperature environments?
A5: The standard probe supports up to +177°C, and the ETR variant supports up to +218°C for the tip and +260°C for the cable.
Q6: Do the probe, cable, and Proximitor require matched calibration?
A6: No, all components are fully interchangeable and do not require matching or bench calibration.
Q7: Is the probe resistant to RF interference?
A7: Yes, the 3300 XL Proximitor Sensor offers improved RFI/EMI immunity and does not require shielded conduits.
Q8: What applications is this probe designed for?
A8: It is primarily used for vibration and position measurements on fluid-film bearing machines, Keyphasor referencing, and speed monitoring.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
