Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 330101-20-36-10-02-00 |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Cable Type | 75Ω triaxial FEP insulated standard cable |
| Connector Type | Miniature coaxial ClickLoc |
| Probe Length | 1.0 meter |
| Output Sensitivity | 7.87 V/mm (200 mV/mil) ±5% (5 m and 1 m systems) |
| Linear Range | 2 mm (80 mils), from 0.25 mm to 2.3 mm |
| Recommended Gap | 1.27 mm (50 mils) |
| Frequency Response | 0 to 10 kHz, +0, -3 dB |
| Operating Temperature (Probe) | -52°C to +177°C |
| Operating Temperature (Cable) | -52°C to +177°C |
| Operating Temperature (Sensor) | -52°C to +100°C |
| Relative Humidity | <3% ASF change in 93% RH (IEC 68-2-3, 56 days) |
| Pressure Seal | Viton® O-ring seal (not pressure tested by default) |
| Power Supply | -17.5 Vdc to -26 Vdc, max 12 mA |
| Output Resistance | 50 Ω |
| Minimum Target Diameter | 15.2 mm (0.6 in) |
| Shaft Diameter (Min/Recommended) | 50.8 mm (2 in) / 76.2 mm (3 in) |
| Electrical Isolation | Integrated in sensor base |
| Total Length | 1.0 meter |
| Weight | 0.323 kg (0.712 lbs) |
FAQ
FAQ
Q1: Is the output voltage of this probe linear?
A1: Yes, the 330101-20-36-10-02-00 probe provides a linear output over a 2 mm range (0.25–2.3 mm), with a maximum deviation of ±0.025 mm for 1-meter systems.
Q2: Can this probe be used interchangeably with non-XL 3300 series components?
A2: Yes, it is both electrically and physically interchangeable, but system performance will be limited to the non-XL components.
Q3: Is the probe suitable for high-temperature applications?
A3: The standard model supports up to 177°C. For higher temperatures (up to 218°C), the ETR version is recommended.
Q4: Is the cable oil-resistant?
A4: Yes, an optional FluidLoc cable version is available to prevent oil migration through the cable core.
Q5: Does the probe system require on-site calibration?
A5: No, the 3300 XL 8 mm system components are fully interchangeable and factory-calibrated.
Q6: Does input voltage variation affect measurement accuracy?
A6: The supply sensitivity is less than 2 mV/V, meaning voltage fluctuations have minimal impact.
Q7: Is the probe certified for hazardous environments?
A7: Yes, it supports CSA, ATEX, and IECEx approvals for use in hazardous areas.
Q8: What is the minimum cable bend radius?
A8: The minimum recommended bend radius is 25.4 mm. Avoid tighter bends to prevent cable damage.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
