Bently Nevada 330101-25-44-10-02-05 3300 XL 8 mm Proximity Probe

FAQ

Q1: What is the linear measurement range of the 330101-25-44-10-02-05 model?
A1: The linear measurement range is 0.25 mm to 2.3 mm (10 to 90 mils).

Q2: What is the recommended installation gap?
A2: The recommended gap is approximately 1.27 mm (50 mils), corresponding to about -9 VDC.

Q3: What is the operating temperature range?
A3: The standard probe operates from -52°C to +177°C, while the ETR version can reach up to +218°C.

Q4: What is the frequency response of the product?
A4: The frequency response is 0 to 10 kHz, with a tolerance of +0/-3 dB.

Q5: What materials are used in the probe?
A5: The probe housing is made of AISI 303/304 stainless steel, and the tip is made of PPS.

Q6: Does the connector require special tools for installation?
A6: No special tools are needed; the ClickLoc connector can be hand-tightened until it clicks.

Q7: What is the recommended minimum shaft diameter?
A7: The recommended shaft diameter is at least 76.2 mm (3 inches) to minimize interference.

Q8: What are the total length and weight of the probe?
A8: The total length is 1.0 meter, and the weight is approximately 0.323 kg.