Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330103-00-14-10-01-00 3300 XL 8 mm Proximity Probe |
| Thread Type | M10 x 1 |
| Total Length | 1.0 meter |
| Weight | 0.323 kg |
| Probe Tip Diameter | 8.0 mm |
| Cable Type | 75Ω triaxial, FEP insulated |
| Material | Probe case: Stainless steel 303/304, Tip: PPS |
| Operating Temperature | -52°C to +177°C |
| Storage Temperature | -52°C to +177°C |
| Maximum Pressure Seal | Viton® O-ring, not factory pressure tested |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting | 1.27 mm (50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (1 m system) |
| Frequency Response | 0–10 kHz (+0/−3 dB) |
| Minimum Shaft Diameter | Recommended ≥76.2 mm |
| Connector Type | Miniature coaxial ClickLoc (with protector) |
| Tensile Strength | 330 N (probe to lead), 270 N (lead to extension cable) |
| Compliance Certifications | CE, FCC Part 15, RoHS, SIL 2/3, ATEX/IECEx Zone 0/2 |
| Relative Humidity | ≤3% ASF change at 93% RH for 56 days |
FAQ
FAQ
Q1: What applications is the 330103 probe suited for?
A1: It is primarily used for vibration and position monitoring on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
Q2: What is the recommended gap setting for the probe?
A2: The recommended gap setting is 1.27 mm (50 mils).
Q3: What is the maximum operating temperature of the probe?
A3: The standard probe has a maximum operating temperature of +177°C.
Q4: Do the probe and extension cable need to be calibrated together?
A4: No. All components in the 3300 XL series are fully interchangeable without individual calibration.
Q5: What is the linear measurement range of the probe?
A5: The linear measurement range is from 0.25 mm to 2.3 mm.
Q6: How is the frequency response of the probe system?
A6: The frequency response is 0–10 kHz (+0/−3 dB).
Q7: What materials are used in the probe construction?
A7: The probe case is made of stainless steel 303/304 and the tip is PPS.
Q8: Does the probe support explosion-proof certifications?
A8: Yes, it supports ATEX/IECEx explosion-proof certifications for use in Zone 0 and Zone 2 areas.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
