Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Value |
|---|---|
| Model | Bently Nevada 330102-00-70-10-02-05 3300 XL 8 mm Proximity Probe |
| Probe Diameter | 8 mm |
| Case Thread | 3/8-24 UNF |
| Cable Type | Standard, armored |
| Total Length | 1.0 meter |
| Weight | 0.323 kg |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303/304 stainless steel |
| Cable Insulation | FEP (fluoroethylene propylene) |
| Connector Type | Miniature coaxial ClickLoc |
| Operating Temperature Range | -52°C to +177°C (Standard) |
| Storage Temperature Range | Same as operating |
| Humidity Resistance | ≤3% ASF change at 93% RH, 56 days |
| Minimum Shaft Diameter | Recommended ≥76.2 mm |
| Linear Range | 0.25–2.3 mm |
| Frequency Response | 0–10 kHz (+0/-3 dB) |
| Output Scale Factor | 7.87 V/mm ±5% (5m/1m system) |
| Probe Pressure Seal | Viton® O-ring |
FAQ
FAQ
Q1: What is the primary application of this probe?
A1: It is primarily used for vibration and position measurements on fluid-film bearing machines, and also suitable for Keyphasor reference and speed measurements.
Q2: Does this model comply with API 670 standards?
A2: Yes, the standard 5-meter system fully meets API 670 standards for mechanical configuration, linear range, accuracy, and temperature stability.
Q3: What is the operating temperature range?
A3: The standard probe operates from -52°C to +177°C, with the same range for storage.
Q4: What is the tensile strength of the probe cable?
A4: The tensile strength is 330 N from probe case to lead, and 270 N from lead to extension cable connector.
Q5: What is the linear measurement range of the probe?
A5: The linear measurement range is 0.25 mm to 2.3 mm.
Q6: Is a specific Proximitor sensor required?
A6: Yes, the system requires a 3300 XL Proximitor sensor for optimal performance.
Q7: Can the probe be mixed with non-XL series components?
A7: It can be mixed, but the system performance will be limited to the non-XL specifications, so it is not recommended.
Q8: What is the weight of the probe?
A8: The standard 1-meter probe weighs approximately 0.323 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
