Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | 330104-00-03-05-02-00 |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Case Material | Stainless Steel (AISI 303 or 304) |
| Thread Size | M10 x 1 |
| Cable Type | 75Ω triaxial, FEP insulated |
| Connector Type | ClickLoc miniature coaxial (with protector) |
| Total Length | 0.5 meter |
| Weight | 0.162 kg |
| Minimum Cable Bend Radius | 25.4 mm (1.0 inch) |
| Linear Range | 2.0 mm (80 mils) |
| Recommended Gap | 1.27 mm (50 mils) @ -9 Vdc |
| Operating Temperature | -52°C to +177°C |
| Storage Temperature | -52°C to +177°C |
| Probe Pressure Seal | Viton® O-ring |
| Shaft Diameter (Min) | 50.8 mm (2 in), recommended: 76.2 mm (3 in) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter (flat) |
| Certification | CSA, ATEX, IECEx (option 05) |
| Interchangeability | Compatible with 3300 XL system components |
FAQ
FAQ
Q1: What are the typical applications of the 330104-00-03-05-02-00 probe?
A1: It is used primarily for measuring vibration and position on fluid-film bearing machines, as well as for Keyphasor reference and speed monitoring.
Q2: Is this probe compatible with non-XL 3300 components?
A2: Yes, it is electrically and physically compatible with non-XL 3300 5 mm and 8 mm components. When mixed, system performance conforms to the lower-spec component.
Q3: What is the operating temperature range?
A3: The standard probe operates from -52°C to +177°C.
Q4: Does this probe require a matching extension cable and Proximitor sensor?
A4: Yes, for full accuracy and linear range, it should be used with 3300 XL extension cable and Proximitor sensor.
Q5: What is the recommended installation gap?
A5: The recommended gap is 1.27 mm (50 mils), yielding an output voltage around -9 Vdc.
Q6: What is the weight of this probe?
A6: It weighs approximately 0.162 kg with a total length of 0.5 meters.
Q7: Does the probe come with hazardous area certifications?
A7: Yes, it is certified under CSA, ATEX, and IECEx standards (option 05), making it suitable for hazardous locations.
Q8: Are tools required to install the ClickLoc connector?
A8: No tools are needed. The ClickLoc connector is designed for finger-tight installation with an audible click to indicate it is secure.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
