Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
Bently Nevada 330180-X1-05 145004-75 – 3300 XL Proximitor Sensor
| Parameter | Description |
|---|---|
| Product Name | 3300 XL Proximitor Sensor |
| Part Number | 330180-X1-05 / 145004-75 |
| System Composition | Probe, extension cable, and Proximitor Sensor |
| Output | Voltage proportional to probe-target distance |
| Linear Range | 2 mm (80 mils), typical: 0.25–2.3 mm (10–90 mils) |
| Recommended Gap | -9 Vdc (approx. 1.27 mm or 50 mils) |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil) ± 5% (standard) |
| Power Supply | -17.5 Vdc to -26 Vdc, 12 mA max |
| Power Sensitivity | <2 mV change per 1 V input change |
| Output Resistance | 50 Ω |
| Min Target Size | 15.2 mm |
| Recommended Shaft Dia | 76.2 mm (3 in) |
| Mounting Options | Panel or DIN-rail mount |
| Housing Material | A308 aluminum (Proximitor), AISI 303/304 SST (probe) |
| Operating Temp (Sensor) | -52°C to +100°C |
| Storage Temp (Sensor) | -52°C to +105°C |
| Operating Temp (Probe) | -52°C to +177°C (standard), up to +218°C (ETR) |
| Operating Temp (Cable) | -52°C to +177°C (standard), up to +260°C (ETR) |
| Cable Capacitance | 69.9 pF/m (typical) |
| Humidity Effect | <3% ASF shift under 93% RH for 56 days |
| Safety Certification | SIL 2 (HFT=0), SIL 3 (HFT=1) |
| Frequency Response | 0–10 kHz, +0, -3 dB (up to 305 m wiring) |
| EMC Compliance | EN 61000-6-2 (Immunity), EN 61000-6-4 (Emission) |
| Connector Type | ClickLoc gold-plated, finger-tight, self-locking |
| Dimensions | 81.3 x 35.1 x 63.5 mm |
| Weight | 0.246 kg (8.67 oz) |
FAQ
FAQ
Q1: Can the 330180-X1-05 sensor operate in high-temperature environments?
A1: Yes, the standard version supports up to +100°C, and with ETR probe/cable it can handle up to +218°C and +260°C.
Q2: Is this sensor compliant with API 670 standards?
A2: Yes, the 3300 XL 8 mm system meets all API 670 specifications for mechanical configuration, accuracy, and thermal stability.
Q3: Do the probes, cables, and Proximitor sensors need to be matched or calibrated together?
A3: No, all 3300 XL components are fully interchangeable and require no matching or bench calibration.
Q4: What is the recommended minimum shaft diameter for accurate measurements?
A4: 76.2 mm (3 in) is recommended to ensure scale factor consistency and low cross-talk.
Q5: Can standard and extended temperature cables be used together in one system?
A5: Yes, but system accuracy will be limited to that of the ETR component.
Q6: Does the sensor have RFI/EMI immunity?
A6: Yes, it offers high immunity, allowing use in non-metallic enclosures without special shielding.
Q7: Are the connectors easy to install?
A7: Yes, the ClickLoc connectors are tool-free and self-locking with an audible click to confirm tightness.
Q8: Is this product certified for use in hazardous areas?
A8: Yes, it holds CSA, ATEX, IECEx, and cNRTLus approvals for Zone 0 and Zone 2 applications.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
