Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330180-X1-IN 145004-137 3300 XL Proximitor Sensor |
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Input | Accepts one non-contacting 3300-series 5 mm or 3300 XL 8 mm Proximity Probe and Extension Cable |
| Power Supply | -17.5 Vdc to -26 Vdc (12 mA max), -23 Vdc to -26 Vdc with barriers |
| Output Resistance | 50 Ω |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting | -9 Vdc (approx. 1.27 mm / 50 mils) |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil) ±5% for 5 m or 1 m systems; ±6.5% for 9 m systems |
| Deviation from Best Fit Line | ≤ ±0.025 mm (±1 mil) for 5 m/1 m; ≤ ±0.038 mm (±1.5 mils) for 9 m |
| Frequency Response | 0 to 10 kHz, +0/-3 dB |
| Minimum Target Size | 15.2 mm (0.6 in) diameter (flat target) |
| Shaft Diameter | Min 50.8 mm (2 in), Recommended 76.2 mm (3 in) |
| Probe Tip Material | PPS (Polyphenylene Sulfide) |
| Probe Case Material | AISI 303 or 304 Stainless Steel |
| Cable Type | 75Ω triaxial FEP insulated (standard) or PFA insulated (ETR) |
| Tensile Strength | 330 N (probe case to probe lead), 270 N (probe lead to extension cable connectors) |
| Connector Material | Gold-plated brass or beryllium copper |
| Environmental Limits | Probe: -52°C to +177°C (standard), up to +218°C/+260°C (ETR); Proximitor Sensor: -52°C to +100°C (operating) |
| Humidity | ≤ 3% ASF change at 93% humidity (IEC 68 2 3, 56 days) |
| Compliance | API 670, CE, FCC Part 15, RoHS, SIL 2/3, ATEX/IECEx |
| Dimensions | 81.3 × 35.1 × 63.5 mm |
| Weight | 0.246 kg |
FAQ
FAQ
Q1: What are the main applications of the 330180-X1-IN Proximitor Sensor?
A1: It is primarily used for vibration and position measurements on fluid-film bearing machines, as well as Keyphasor speed and phase reference measurements.
Q2: Is it compatible with non-XL series components?
A2: Yes, it is electrically and physically compatible with non-XL 3300 series 5 mm and 8 mm components, but performance will be limited to non-XL specifications.
Q3: What is the recommended probe gap setting?
A3: The recommended gap is -9 Vdc, approximately 1.27 mm (50 mils).
Q4: Can this model operate in high-temperature environments?
A4: Yes, with the Extended Temperature Range (ETR) version, the probe can withstand up to 218°C and the cable up to 260°C.
Q5: What is the linear range of the sensor?
A5: The linear range is 2 mm (80 mils), from 0.25 mm to 2.3 mm.
Q6: What should be considered during installation?
A6: Use DIN rail or panel mounting, maintain a minimum cable bend radius of 25.4 mm, and keep adequate probe spacing to avoid cross-talk.
Q7: Does the product meet international certification requirements?
A7: Yes, it meets API 670, CE, FCC, RoHS, SIL 2/3, and ATEX/IECEx hazardous area certifications.
Q8: What is the housing material and protection capability?
A8: The housing is made of A308 aluminum with good electrical isolation and strong RFI immunity, suitable for fiberglass or metal enclosures.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
