Bently Nevada 170133-050-00 Internal Proximitor Module

FAQ

Q1: What is the function of the 170133‑050‑00 module?
A1: It is an internal Proximitor signal conditioning module that interfaces with 3300 series proximity probes to provide displacement (gap) measurement output.

Q2: What probes are compatible with this module?
A2: It supports 3300 series probes, including both 5 mm and 8 mm diameters.

Q3: What is the scale factor for displacement output?
A3: The module provides approximately 200 mV per mil of gap (≈ 7.87 mV per µm).

Q4: What is the usable calibration range?
A4: The module calibrates over 250 µm to 2250 µm (10 to 90 mil range).

Q5: How fast is the response (frequency range)?
A5: It supports bandwidth up to about 12.5 kHz; –3 dB point is near 50 mil gap.

Q6: What are the operating and storage temperature ranges?
A6: Operating from –34 °C to +85 °C, and storage from –40 °C to +85 °C.

Q7: What is the weight and size of the module?
A7: It weighs approximately 0.320 kg, and the housing is about 24.18 cm × 2.44 cm × 24.13 cm.

Q8: How is fault detection handled?
A8: The module provides a fault condition output such that when a probe fault (open/short) occurs, output shifts near 1 V common, signaling a fault state.